Grain growth of Al-4Cu-Mg alloy during isothermal heat treatment

被引:0
|
作者
Haitao Jiang and Miaoquan Li Materials Science and Engineering School
机构
关键词
grain growth; semi-solid; isothermal heat treatment; Al-4Cu-Mg alloy;
D O I
暂无
中图分类号
TG151.1 [加热时的转变];
学科分类号
080201 ; 080503 ;
摘要
The microstructure of an Al-4Cu-Mg alloy during isothermal heat treatment in the Strain Induced Melt Activation (SIMA) process was investigated and the kinetics of grain growth was analyzed. The grain growth during isothermal heat treatment of the Al4Cu-Mg alloy coincided with the Ostwald ripening theory. During isothermal heat treatment, both grain shape and the high volume fraction of solid phase have significant effects on grain growth. Therefore, a new grain growth model based on the Ostwald ripening theory was proposed taking into consideration the grain shape and the volume fraction of solid phase. By comparing the calculated results with the experimental results, it was confirmed that the present model could be applied to grain growth during isothermal heat treatment of the Al-4Cu-Mg alloy in the SIMA process.
引用
收藏
页码:67 / 72
页数:6
相关论文
共 50 条
  • [21] Study on the Microstructure Coarsening of Al-Zn-Mg-Cu Alloy during Semi-Solid Isothermal Heat-Treatment
    Qi Yuanhao
    Yang Guangyu
    Zhang Lili
    Jie Wanqi
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (03) : 413 - 417
  • [22] Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment
    Xu, Xiao
    Ma, Xinwu
    Zhao, Guoqun
    Chen, Xiaoxue
    Wang, Yongxiao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 867
  • [23] Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment
    Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials , Shandong University, Jinan
    Shandong
    250061, China
    J Alloys Compd, 2021,
  • [24] Characterization of friction stir welded Al-4Cu-Mg alloy / Al-16Si-4Cu-10SiC composite joint
    Aval, Hamed Jamshidi
    Galvao, Ivan
    JOURNAL OF ADVANCED JOINING PROCESSES, 2024, 9
  • [25] THE MICROSTRUCTURE DEVELOPMENT DURING ISOTHERMAL HEAT TREATMENT STUDY OF AN Al-Mg-Si ALUMINIUM ALLOY
    Ziar, Toufik
    Farh, Hichem
    Guemini, Rebai
    ACTA METALLURGICA SLOVACA, 2016, 22 (03): : 138 - 144
  • [26] Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment
    Fan Xi-gang
    Jiang Da-ming
    Meng Qing-chang
    Li Nian-kui
    Sun Zhao-xia
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1247 - S1250
  • [27] Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment
    樊喜刚
    蒋大鸣
    孟庆昌
    李念奎
    孙兆霞
    TransactionsofNonferrousMetalsSocietyofChina, 2006, (S3) : 1247 - 1250
  • [28] Evolution of intermetallic phases of Al-Zn-Mg-Cu alloy during heat treatment
    Analysis and Measurement Center, Harbin Institute of Technology, Harbin 150001, China
    不详
    Trans Nonferrous Met Soc China, 2006, SUPPL. 3 (1247-1250):
  • [29] Evaluation of tool rotational speed effect in Al-16Si-4Cu-10SiC composite/Al-4Cu-Mg alloy joint
    Aval, Hamed Jamshidi
    Galvao, Ivan
    MATERIALS SCIENCE AND TECHNOLOGY, 2024,
  • [30] Structural evolution and grain growth kinetics during isothermal heat treatment of nanostructured Al6061
    Hosseini, N.
    Abbasi, M. H.
    Karimzadeh, F.
    Enayati, M. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 525 (1-2): : 107 - 111