Comparative analysis of CFD models for jetting fluidized beds:Effect of particle-phase viscosity

被引:0
|
作者
Pei Pei a
机构
基金
中国国家自然科学基金;
关键词
Jetting fluidized bed Hydrodynamics CFD Eulerian–Eulerian model Particle phase viscosity;
D O I
暂无
中图分类号
TQ021 [基础理论];
学科分类号
摘要
Under the Eulerian-Eulerian framework of simulating gas-solid two-phase flow,the accuracy of the hydrodynamic prediction is strongly affected by the selection of rheology of the particulate phase,for which a detailed assessment is still absent.Using a jetting fluidized bed as an example,this work investigates the influence of solid rheology on the hydrodynamic behavior by employing different particle-phase viscosity models.Both constant particle-phase viscosity model(CVM)with different viscosity values and a simple two-fluid model without particle-phase viscosity(NVM)are incorporated into the classical twofluid model and compared with the experimental measurements.Qualitative and quantitative results show that the jet penetration depth,jet frequency and averaged bed pressure drop are not a strong function of the particle-phase viscosity.Compared to CVM,the NVM exhibits better predictions on the jet behaviors,which is more suitable for investigating the hydrodynamics of gas-solid fluidized bed with a central jet.
引用
收藏
页码:444 / 449
页数:6
相关论文
共 50 条
  • [31] Effect of combined particle-phase diffusivity and viscosity on the compressible boundary layer of a particulate suspension over a flat plate
    Chamkha, AJ
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1999, 121 (02): : 420 - 429
  • [32] Effect of packing fraction on granular jetting from solid sphere entry into aerated and fluidized beds
    Marston, J. O.
    Seville, J. P. K.
    Cheun, Y-V.
    Ingram, A.
    Decent, S. P.
    Simmons, M. J. H.
    PHYSICS OF FLUIDS, 2008, 20 (02)
  • [33] RECIRCULATION MODELS FOR THE MIXING OF THE SOLID PHASE IN FLUIDIZED BEDS.
    Sirenko, V.F.
    Timonin, A.S.
    Mushtaev, V.I.
    Theoretical Foundations of Chemical Engineering, 1984, 18 (04) : 315 - 321
  • [34] Effect of system size on particle-phase stress and microstructure formation
    Lasinski, ME
    Curtis, JS
    Pekny, JF
    PHYSICS OF FLUIDS, 2004, 16 (02) : 265 - 273
  • [35] Enhanced Particle Mixing in Pulsed Fluidized Beds and the Effect of Internals
    Hadi, Bashar
    van Ommen, J. Ruud
    Coppens, Marc-Olivier
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (04) : 1713 - 1720
  • [36] Effect of particle size on solids mixing in bubbling fluidized beds
    Shen, LH
    Zhang, MY
    POWDER TECHNOLOGY, 1998, 97 (02) : 170 - 177
  • [37] CFD modeling of segregation in binary solid-liquid fluidized beds: Influence of liquid viscosity and density
    Puhan, Priyabrata
    Awasthi, Anmol
    Mukherjee, Asim Kumar
    Atta, Arnab
    CHEMICAL ENGINEERING SCIENCE, 2021, 246
  • [38] New closure models for CFD modeling of high-density circulating fluidized beds
    Cruz, E.
    Steward, F. R.
    Pugsley, T.
    POWDER TECHNOLOGY, 2006, 169 (03) : 115 - 122
  • [39] Particle dispersion and pressure fluctuations in three-phase fluidized beds
    Kang, Y
    Woo, KJ
    Ko, MH
    Kim, SD
    CHEMICAL ENGINEERING SCIENCE, 1997, 52 (21-22) : 3723 - 3732
  • [40] Particle dispersion in viscous three-phase inverse fluidized beds
    Lee, Kyoung Il
    Son, Sung Mo
    Kim, Uk Yeong
    Kang, Yong
    Kang, Suck Hwan
    Kim, Sang Done
    Lee, Jea Keun
    Seo, Yong Chil
    Kim, Woo Hyun
    CHEMICAL ENGINEERING SCIENCE, 2007, 62 (24) : 7060 - 7067