Design and dynamic characteristic prediction of air-powered twin-rotor piston engine

被引:0
|
作者
徐海军 [1 ]
张雷 [1 ]
潘存云 [1 ]
张湘 [1 ]
机构
[1] College of Mechatronic Engineering and Automation,National University of Defense Technology
基金
中国国家自然科学基金;
关键词
air-powered engine; twin-rotor piston engine; numerical simulation; dynamic characteristics;
D O I
暂无
中图分类号
U464 [汽车发动机];
学科分类号
080703 ;
摘要
A novel air-powered twin-rotor piston engine(ATPE) utilizing a differential velocity driving mechanism to achieve a high output torque was proposed.The ATPE had eight separated rotary cylinders which can dynamically enlarge the engine displacement as a result of the special driving mechanism,which was named dynamic volume expansion.The mathematical model of ATPE comprising a dynamic model and a thermodynamic model was established under the assumption of no mechanical friction.The model was numerically simulated in Matlab.The results show that shortage of low output torque confusing traditional air-powered engines can be overcome.The average output torque sharply increases to 100 N·m,which is about three times that of traditional air-powered engines with equal cylinder displacement under the pressure of 0.6 MPa at 480 r/min.ATPE can be used to drive vehicles directly without transmission box,therefore the energy transfer efficiency of ATPE can be increased.Furthermore,benefitting from the novel gas distribution system,the engine shows an ability in self-adjusting under different loads.The arrangements of air ports automatically adjust the open interval of air ports according to the load,which may simplify the speed control system.
引用
收藏
页码:4585 / 4596
页数:12
相关论文
共 50 条
  • [31] Investigation on Theoretic Profile Curve of the Spherical Cam Transmission Mechanism in a Twin-rotor Piston Engine
    Xu, Haijun
    Zhou, Faliang
    Chen, Hu
    Zhang, Lei
    Zou, Teng'an
    2019 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2019, : 1503 - 1508
  • [32] Kinematic performance of new-type power transmission mechanism in twin-rotor piston engine
    Chen, Hu
    Xu, Haijun
    Pan, Cunyun
    Zou, Tengan
    Jiang, Lei
    Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology, 2015, 37 (05): : 75 - 83
  • [33] Analysis on Kinematic of Rod on Rotor with Sine Curve Revolving Speed in Twin-Rotor Cylinder-embedded Piston Engine
    Chen, Hu
    Pan, Cunyun
    Zou, Tengan
    MATERIALS SCIENCE, MACHINERY AND ENERGY ENGINEERING, 2014, 853 : 553 - 558
  • [34] Simulation on the port timing of an air-powered engine
    Chen, Y
    Liu, H
    Tao, GL
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2005, 38 (2-3) : 259 - 273
  • [35] Design and implementation of an air-powered motorcycles
    Shen, Yu-Ta
    Hwang, Yean-Ren
    APPLIED ENERGY, 2009, 86 (7-8) : 1105 - 1110
  • [36] A Multivariable Twin-Rotor System Control Design
    Pathan, Erum
    Khan, Mubashir Hayat
    Aslam, Muhammad Kashif
    Asad, Muhammad
    Arshad, Haider
    Rabani, Muhammad Imran
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2021, 11 (01) : 6626 - 6631
  • [37] Feasibility of parallel air-powered and diesel hybrid engine
    Hu, Jun-Qiang
    Yu, Xiao-Li
    Nie, Xiang-Hong
    Chen, Ping-Lu
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2009, 43 (09): : 1632 - 1637
  • [38] Study on the temperature compensation technology of air-powered engine
    Shi, Yan
    Sun, Junpeng
    Cai, Maolin
    Xu, Qiyue
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2015, 7 (02)
  • [39] Analysis on energy transfer system in air-powered engine
    Hefei University of Technology, Hefei 230009, China
    不详
    Zhongguo Jixie Gongcheng, 2007, 7 (870-873):
  • [40] Analysis of circumferential oil film thickness for piston ring in twin-rotor piston engine under differential velocity motion of combined annular cylinder
    Yang, Congnan
    Xu, Haijun
    Xu, Xiaojun
    Pan, Dibo
    Jiang, Yue
    Tang, Yuanjiang
    Yuan, Lei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (07) : 3772 - 3789