MECHANISM RESEARCH FOR 3D NON-AXISYMMETRIC THIN-WALL TUBE OFFSET SPINNING

Difference of offset spinning with conventional symmetric spinning is analyzed. A 3D FEM model for offset tube neck-spinning is established and the spinning process is simulated by means of ANSYS software. Dynamic boundary and contact problems in simulation are solved. Transient stress distribution of contact area, transient strain distribution of nodes in typical section and strain distribution of the workpiece at last are attained, the place and the cause of crack are analyzed. Strain variation curves with time of offset spinning and conventional spinning are compared. It shows the mechanism difference between offset spinning and conventional spinning. In addition, simulation results show how strain distribution of typical section, thickness of some typical nodes, axial extension in left section and force of three rollers change with time. According to the study of the variation curve, material flow law along radial, tangential and axial direction is attained and the whole spinning process is studied. The simulation results discover that offset distance is the key to manufacture offset non-symmetric tube, and process parameters change with spinning angle. Experiment data really reflect different process parameters’ influence on conventional symmetric and offset spinning force. Experiments accord well with simulation.