Rheological Behavior and Process Prediction of Low Viscosity Epoxy Resin for RTM

被引：0
|
作者：
周洲 [1 ]
蒋炳炎 [1 ,2 ]
CHEN Xingkai [2 ]
JIANG Fengze [1 ]
JIAN Yuping [2 ]
机构：
[1] School of Mechanical and Electrical Engineering, The State Key Laboratory of High Performance and Complex Manufacturing, Central South University
[2] School of Aeronautics and Astronautics, Central South University
来源：
Journal of Wuhan University of Technology(Materials Science) | 2014年 / 05期
关键词：
resin transfer molding(RTM); rheological behavior; epoxy resin system; viscosity model;
D O I：
暂无
中图分类号：
V255 [高分子材料];
学科分类号：
0805 ; 080502 ;
摘要：
The rheological behavior of a low epoxy resin system-SR8100/SD8734 for RTM in aviation industry was studied with viscosity experiments. The dual-Arrhenius rheological model and the improved engineering viscosity model were introduced and compared with the experimental data. The results indicated that the viscosity in the earlier stage calculated by dual-Arrhenius model matched the experimental data. As rising to 400 m·Pas, the viscosity calculated by the improved engineering model was closer to the experimental data. The processing windows of the resin system for RTM were determined by combining the two models, which could predict the rheological behavior of the resin system in a more credible way. 30-45 ℃ was the optimum processing temperature.
引用
收藏
页码：1078 / 1082
页数：5
相关论文
共 50 条
  • [31] Numerical analysis on microscopic flow behavior of resin with resin transfer molding (RTM) process
    Department of Material Engineering, Shenyang Institute of Aeronautical Engineering, Shenyang 110034, China
    不详
    Guti Houjian Jishu, 2006, 4 (297-300):
  • [32] Influence of Glass Microsphere Filler on the Rheological Behavior of an Epoxy Resin
    Kang, Y.
    Lee, W.
    Hwang, J.
    Lee, Y.
    INTERNATIONAL POLYMER PROCESSING, 2018, 33 (02) : 146 - 152
  • [33] A simplified chemorheological model of viscosity evolution for solvent containing resol resin in RTM process
    Yi, Xiaolin
    Kuang, Xiao
    Kong, Lei
    Dong, Xia
    Feng, Zhihai
    Wang, Dujin
    JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (36)
  • [34] Correlation Analysis of Epoxy/Amine Resin Cure, Structure and Chemorheological Behavior in RTM Processes
    Ding, Yanyu
    Jia, Yuxi
    Yang, Junying
    He, Haidong
    Sun, Sheng
    Shi, Tongfei
    POLYMER COMPOSITES, 2011, 32 (04) : 648 - 656
  • [35] Establishment of time-temperature-transfer diagram of epoxy resin for rapid RTM process and evaluation of carbon fiber/epoxy resin composites
    Qi S.
    Li B.
    Li G.
    Yang X.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2019, 36 (08): : 1804 - 1812
  • [36] A study on the application of a low viscosity epoxy resin curing system
    Peng Yongli
    Liang Yi
    Huang Chi
    Wang Zuihan
    GREEN BUILDING TECHNOLOGIES AND MATERIALS II, 2013, 689 : 286 - 289
  • [37] Effect of Curing Agent and Temperature on the Rheological Behavior of Epoxy Resin Systems
    Zhao, Chenhui
    Zhang, Guangcheng
    Zhao, Lei
    MOLECULES, 2012, 17 (07): : 8587 - 8594
  • [38] Investigation of the Curing Kinetics and Rheological Behavior of Multifunctional Epoxy Resin System
    Zhou Zhengwei
    Bai Ruicheng
    Ren Musu
    Sun Jinliang
    Zhou Ze
    Hu Qingping
    Wang Chuanbin
    POLYMERS & POLYMER COMPOSITES, 2011, 19 (4-5): : 345 - 349
  • [39] Resin transfer molding (RTM) process of a high performance epoxy resin. I: Kinetic studies of cure reaction
    Lee, CL
    Ho, JC
    Wei, KH
    POLYMER ENGINEERING AND SCIENCE, 2000, 40 (04): : 929 - 934
  • [40] Curing process analysis for epoxy resin casting (analysis of temperature and viscosity in nonisothermal process)
    Aoki, Yukinori
    Nishimura, Tetsuro
    Takei, Masafumi
    1996, JSME, Tokyo, Japan (62):
12345