Effect of post-weld heat treatment on microstructure and properties of Ti-23Al-17Nb alloy laser beam welding joints

被引：1
|
作者：
王国庆 [1 ]
吴爱萍 [1 ]
赵玥 [1 ]
邹贵生 [1 ]
陈强 [1 ]
任家烈 [1 ]
机构：
[1] Key Laboratory for Advanced Materials Processing Technology of the Ministry of Education,Department of Mechanical Engineering,Tsinghua University
来源：
Transactions of Nonferrous Metals Society of China | 2010年 / 20卷 / 05期
关键词：
Ti-23Al-17Nb; Ti3Al-based alloy; laser beam welding; post-weld heat treatment; mechanical properties;
D O I：
暂无
中图分类号：
TG456.7 [激光焊];
学科分类号：
摘要：
The mechanical properties of Ti-23Al-17Nb (mole fraction,%) laser beam welding alloy joint at room temperature are comparable to that of the base materials.However,the strength and ductility of the as-welded joint deteriorate seriously after high temperature circulation.The effect of post-welded heat treatment on the microstructure and mechanical properties of the joint was investigated.The heat treatment was taken at 980 ℃ for 1.5 h,then furnace cooling and air cooling were performed separately.The results indicate that proper post-welded heat treatment improves the ductility of the joint at high temperature.
引用
收藏
页码：732 / 739
页数：8
相关论文
共 50 条
  • [41] Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints by GMAW
    Dong Wang
    Changshu He
    Hao Wang
    Xiang Zhao
    Liang Zuo
    Acta Metallurgica Sinica (English Letters), 2014, 27 : 245 - 252
  • [42] Microstructures and mechanical properties of Ti-24Al-17Nb (at.%) laser beam welding joints
    Wu, AP
    Zou, GS
    Ren, JL
    Zhang, HJ
    Wang, GQ
    Liu, X
    Xie, MR
    INTERMETALLICS, 2002, 10 (07) : 647 - 652
  • [43] The effect of post-weld heat treatment on microstructure and tensile properties of alloy C-276 welded joints fabricated by pulsed current gas tungsten arc welding
    Arivarasu M.
    Manikandan M.
    Vinoth Jebaraj A.
    Arivazhagan N.
    Ciencia e Tecnologia dos Materiais, 2017, 29 (02): : 39 - 45
  • [44] Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints by GMAW
    Dong Wang
    Changshu He
    Hao Wang
    Xiang Zhao
    Liang Zuo
    ActaMetallurgicaSinica(EnglishLetters), 2014, 27 (02) : 245 - 252
  • [45] Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of X52 Linepipe HFIW Joints
    Sisi, A. Kavousi
    Mirsalehi, S. E.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (04) : 1626 - 1633
  • [46] Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of X52 Linepipe HFIW Joints
    A. Kavousi Sisi
    S. E. Mirsalehi
    Journal of Materials Engineering and Performance, 2015, 24 : 1626 - 1633
  • [47] Effects of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints by GMAW
    Wang, Dong
    He, Changshu
    Wang, Hao
    Zhao, Xiang
    Zuo, Liang
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2014, 27 (02) : 245 - 252
  • [48] Combined Effect of Gas Tungsten Arc Welding Process Variants and Post-Weld Heat Treatment on Tensile Properties and Microstructural Characteristics of Ti-6Al-4V Alloy Joints
    Vaithiyanathan, V.
    Balasubramanian, V.
    Malarvizhi, S.
    Petley, Vijay
    Verma, Shweta
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2020, 9 (02) : 194 - 211
  • [49] Effect of post-weld heat treatment on mechanical properties and microstructure in electric arc welded mild steel joints
    Aninda, Rayan Karim
    Karobi, Shazrina Mariam
    Shariar, Redwan
    Rahman, Md. Musfiqur
    Rabby, Md Insiat Islam
    JOURNAL OF ENGINEERING RESEARCH, 2024, 12 (02): : 210 - 215
  • [50] Effect of post-weld heat treatment on the microstructure and mechanical properties of CWW GMAW
    Ma, Chaofan
    Wang, Xianglong
    Ni, Zhengxuan
    Chen, Zhihong
    Yang, Zhidong
    MODERN PHYSICS LETTERS B, 2025, 39 (06):
12345