Superplastic formability of Ti-6Al-4V butt-welded plate by laser beam welding

被引：6
|
作者：
王刚 [1 ]
张文丛 [1 ]
张功磊 [1 ]
徐志良 [1 ]
机构：
[1] School of Materials Science and Engineering,Harbin Institute of Technology at Weihai
来源：
TransactionsofNonferrousMetalsSocietyofChina | 2009年 / 19(S2)卷 / S2期
基金：
中国国家自然科学基金;
关键词：
superplastic forming; Ti-6Al-4V; laser beam welding;
D O I：
暂无
中图分类号：
TG456.7 [激光焊];
学科分类号：
摘要：
The superplasticity of Ti-6Al-4V butt-welded plates by laser beam welding(LBW)was studied in virtue of hot tensile tests and superplastic bulging tests.Furthermore,microstructural evolution of weld metal upon superplastic forming was systematically analyzed via metallographical tests and scanning electron microscope(SEM).The relation between the microstructure of weld metal and its superplastic ability was discussed.The experimental results show that Ti-6Al-4V butt-welded plates by LBW possess superplasticity.The maximum elongation is up to 154%and the maximum bulge height can be up to 1.81 times the internal radius of the female die.There is an optimum value of the bulge height for bulging gas pressure.
引用
收藏
页码：429 / 433
页数：5
相关论文
共 50 条
  • [21] Surface contamination effects during laser beam welding of Ti-6Al-4V
    Skaggs, JD
    Olson, DL
    JOINING AND REPAIR OF GAS TURBINE COMPONENTS, CONFERENCE PROCEEDINGS FROM MATERIALS SOLUTION '97, 1997, : 119 - 124
  • [22] Microstructure and Mechanical Properties of Ti-6AL-4V Joints by Laser Beam Welding
    Yang Jing
    Cheng Donghai
    Huang Jihua
    Zhang Hua
    Zhao Xingke
    Guo Heping
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (02) : 259 - 262
  • [23] Nd:YAG laser beam welding of the titanium alloy Ti-6Al-4V
    Patt, T
    Rümenap, F
    Viöl, W
    ECLAT - EUROPEAN CONFERENCE ON LASER TREATMENT OF MATERIALS, 1998, : 363 - 368
  • [24] Research on CO2 laser beam welding of Ti-6Al-4V
    Liu, JH
    Chen, J
    Yang, DC
    LASER PROCESSING OF MATERIALS AND INDUSTRIAL APPLICATIONS, 1996, 2888 : 368 - 370
  • [25] Fiber laser welding of NiTi to Ti-6Al-4V
    Miranda, R. M.
    Assuncao, E.
    Silva, R. J. C.
    Oliveira, J. P.
    Quintino, L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 81 (9-12): : 1533 - 1538
  • [26] Fiber laser welding of NiTi to Ti-6Al-4V
    R. M. Miranda
    E. Assunção
    R. J. C. Silva
    J. P. Oliveira
    L. Quintino
    The International Journal of Advanced Manufacturing Technology, 2015, 81 : 1533 - 1538
  • [27] Superplastic deformation mechanism and mechanical behavior of a laser-welded Ti-6Al-4V alloy joint
    Chen, Shuhai
    Huang, Jihua
    Cheng, Donghai
    Zhang, Hua
    Zhao, Xingke
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 541 : 110 - 119
  • [28] Influence of beam oscillation in electron beam welding of Ti-6AL-4V
    Kar, Jyotirmaya
    Roy, Sanat Kumar
    Roy, Gour Gopal
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (9-12): : 4531 - 4541
  • [29] Influence of beam oscillation in electron beam welding of Ti-6AL-4V
    Jyotirmaya Kar
    Sanat Kumar Roy
    Gour Gopal Roy
    The International Journal of Advanced Manufacturing Technology, 2018, 94 : 4531 - 4541
  • [30] Electron beam welding of SiCp/Al composite to Ti-6Al-4V
    Chen, G. Q.
    Zhang, B. G.
    Liu, L. Y.
    Feng, J. C.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 1309 - 1312
12345