Microstructure, Texture Evolution, and Strain Hardening Behaviour of As-extruded Mg-Zn and Mg-Y Alloys under Compression

被引:0
|
作者
韩修柱 [1 ]
XIAO Tao [1 ]
于子健 [2 ]
机构
[1] Beijing Institute of Spacecraft System Engineering
[2] Faculty of Materials and Manufacturing, Beijing University of Technology
基金
中国国家自然科学基金;
关键词
D O I
暂无
中图分类号
TG146.22 [];
学科分类号
080502 ;
摘要
Microstructure, texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn(wt%) alloys were investigated under room temperature compression. Microstructural characterization was performed by optical microscopy, scanning electron microscopy, electron back scattered diffraction and transmission electron microscopy. The experimental results show that Mg-1Zn alloy exhibits conventional three-stage strain hardening curves, while Mg-1Y alloy exhibits novel six-stage strain hardening curves. For Mg-1Y alloy,rare earth texture leads to weak tensile twinning activity in compression and consequently results in a moderate evolution to <0001> texture. Moreover, inefficient tensile twinning activity and weak slip-twinning interaction give rise to excellent ductility and high hardening capacity but low strain hardening rate. For Mg-1Zn alloy,basal texture leads to pronounced tensile twinning activity in compression and consequently results in rapid evolution to <0001> texture. The intense tensile twinning activity and strong slip-twinning interaction lead to high strain hardening rate but poor ductility and low hardening capacity.
引用
收藏
页码:430 / 439
页数:10
相关论文
共 50 条
  • [21] Effects of Y on microstructure and properties of as-extruded Mg-5Li alloys
    Zu, Guo-Yin
    Du, Peng
    Song, Hong-Quan
    Sun, Shi-Liang
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2015, 36 (10): : 1422 - 1425
  • [22] The relation between microstructure and corrosion properties of extruded Mg-Zn base alloys
    Ben-Hamu, G.
    Eliezer, D.
    Shin, K. S.
    MAGNESIUM TECHNOLOGY 2007, 2007, : 317 - +
  • [23] EVOLTION OF COMPRESSION STRAIN AND MICROSTRUCTURE OF Mg-Nd AND Mg-Y ALLOYS PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
    Zemkova, Maria
    Vesely, Jozef
    Kral, Robert
    Bohlen, Jan
    Correa, Cinthia Antunes
    Minarik, Peter
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 1369 - 1374
  • [24] Effect of pre-aging on age hardening and microstructure in Mg-Zn and Mg-Zn-Al alloys
    Oh-ishi, Keiichiro
    Honol, Kazuhiro
    Shin, Kwang Seon
    MAGNESIUM TECHNOLOGY 2008, 2008, : 123 - +
  • [25] Microstructure and texture evolution of deformed Mg-Zn alloy during recrystallization
    Du, Yuzhou
    Zheng, Mingyi
    Ge, Yanfeng
    Jiang, Bailing
    Shen, Mingjie
    MATERIALS CHARACTERIZATION, 2018, 145 : 501 - 506
  • [26] Microstructure, texture and mechanical properties of as-extruded Mg-Zn-Er alloys containing W-phase
    Wang, Qingfeng
    Liu, Ke
    Wang, Zhaohui
    Li, Shubo
    Du, Wenbo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 602 : 32 - 39
  • [27] Investigation of the Microstructure and Bio-corrosion Behaviour of Mg-Zn and Mg-Zn-Ca Alloys
    Lu, Yu
    Bradshaw, Andrew
    Chiu, Yulung
    Jones, Ian
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 788 - 792
  • [28] Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy
    Yan, Yang
    Cao, Hanwen
    Kang, Yijun
    Yu, Kun
    Xiao, Tao
    Luo, Jie
    Deng, Youwen
    Fang, Hongjie
    Xiong, Hanqing
    Dai, Yilong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 693 : 1277 - 1289
  • [29] Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys
    Zhao, Chaoyue
    Chen, Xianhua
    Pan, Fusheng
    Gao, Shangyu
    Zhao, Di
    Liu, Xiaofang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 713 : 244 - 252
  • [30] Dynamic recrystallization of Mg and Mg-Y alloys: Crystallographic texture development
    Cottam, R.
    Robson, J.
    Lorimer, G.
    Davis, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 375 - 382