Calculation of electric field effects on the Gibbs free energy of the Al-Li-Mg alloy

被引:0
|
作者
ZHANG Jianjun
机构
基金
中国国家自然科学基金;
关键词
Al-Li-Mg alloy; thermodynamics parameters; Thomas-Fermi model; electric field;
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
摘要
Based on the Thomas-Fermi model,the calculation methods of the monatomic Gibbs free energy were found. The interior potential boundary condition under electric field was defined. The calculation methods of Gibbs free energy for the monatomic,compound,and solid solution with electric field were set up. Under the influence of electric field,the Gibbs free energy of Al is the most sensitive,followed by those of Li and Mg. At the solution temperature the Gibbs free energies of Al3Li and its elements under electric field are not symmetrical about the zero point of electric field,whereas at the aging temperature their values are symmetrical about the zero point of electric field. At the solution temperature near the zero point of electric field,the Gibbs free energy of Al3Li is higher than that of Al-2.14%Li. And at 460 K the Gibbs free energy of Al3Li is lower than that of Al-2.14wt.%Li under electric field. The Gibbs free energy of 1420 alloy decreases from both sides of electric field to the zero point at the aging temperature.
引用
收藏
页码:508 / 514
页数:7
相关论文
共 50 条
  • [41] Elevated temperature deformation behavior of dispersion-strengthened Al and Al-Li-Mg alloys
    Jane Minay
    Richard Dashwood
    Henry McShane
    Journal of Materials Engineering and Performance, 2001, 10 : 136 - 142
  • [42] Influence of ultrafine ceramic reinforcement on the microstructure and properties of Al-Li-Mg alloys
    Shakesheff, AJ
    Bushby, R
    Gerique, T
    Lazzeri, L
    de Sanctis, M
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 1175 - 1180
  • [43] Gibbs Free Energy Calculation of Al-Cu alloy using Thermo-Calc software for Microstructure Simulation
    Wang, Guotian
    Zhao, Chenguang
    Qi, Xiaojie
    Tang, Jinjun
    Liang, Cui
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 256 - +
  • [44] INELASTIC ELECTRON REFLECTION AND SECONDARY-ELECTRON EMISSION OF LI-MG AND AL-LI-MG OXIDIZED LAYERS
    BRONSHTE.IM
    KUDRYASH, AP
    BROZDNIC.AN
    IZVESTIYA AKADEMII NAUK SSSR SERIYA FIZICHESKAYA, 1973, 37 (12): : 2488 - 2491
  • [45] Elevated temperature deformation behavior of dispersion-strengthened Al and Al-Li-Mg alloys
    Minay, J
    Dashwood, R
    McShane, H
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (02) : 136 - 142
  • [46] Solid state reactions in mechanically alloyed Al-Li and Al-Li-Mg alloys with various metal oxides
    Sugamata, M
    Kaneko, J
    Higuchi, H
    MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 1, 1998, 269-2 : 157 - 162
  • [47] Oxide dispersed materials prepared by reaction milling of Al-Li and Al-Li-Mg alloys with various oxides
    Higuchi, H
    Sugamata, M
    Kaneko, J
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1996, 60 (12) : 1207 - 1214
  • [48] THE HEAT-TREATMENT, MICROSTRUCTURE AND MECHANICAL PROPERTY CORRELATIONS IN AL-LI-CU AND AL-LI-MG ALLOYS
    TELESMAN, I
    CHANANI, G
    NARAYANAN, GH
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1982, 18 (03): : 266 - 266
  • [49] The effect of electric field on the recrystallization of 2091 Al-Li alloy
    Liu, W
    Cui, JZ
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (16) : 1400 - 1401
  • [50] Rigorous calculation of electric field effects on the free energy change of the electron transfer reaction
    Seki, K
    Traytak, SD
    Tachiya, M
    JOURNAL OF CHEMICAL PHYSICS, 2003, 118 (02): : 669 - 679