Improvement of prediction model for work roll thermal contour in hot strip mill

被引：0
|
作者：
王连生 [1 ]
杨荃 [1 ]
何安瑞 [1 ]
郑宣 [1 ]
于洪瑞 [1 ]
机构：
[1] National Engineering Research Center for Advanced Rolling Technology,University of Science and Technolo gy Beijing
来源：
JournalofCentralSouthUniversityofTechnology | 2010年 / 17卷 / 06期
关键词：
hot rolling; finite element; finite difference; work roll; thermal contour;
D O I：
暂无
中图分类号：
TG333 [轧钢机械设备];
学科分类号：
摘要：
Though high accuracy of the thermal contour was obtained while adopting finite element method,it could not meet the real-time requirement.One-dimensional finite difference method could realize real-time control in the case of neglecting both the circumferential and radical heat exchange,but the over-simplified modes resulted in poor accuracy.And two-dimensional full explicit difference was also limited in practical application since its time step was restricted to keep the model stable.Consequently,a new method of alternating direction finite difference was introduced and discussed in the model’s stability,calculating speed and precision.Specific work roll after one real rolling unit was researched,The result shows that error of temperature on work roll surface between measured and calculated values is within 5 ℃.The influence of rolling rhythm and strip width on thermal crown was also studied.The conclusion is verified theoretically and practically that it can maintain absolutely stable and meet the online requirement.
引用
收藏
页码：1251 / 1257
页数：7
相关论文
共 50 条
  • [21] TOUGH WORK ROLL FOR HOT STRIP MILL WITH CROWN CONTROL
    不详
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (05) : 385 - 385
  • [22] Initial profile design of work roll for hot strip mill
    State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
    Dongbei Daxue Xuebao, 2008, 11 (1585-1588):
  • [23] Roll wear model for 1700 hot strip mill
    State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
    Dongbei Daxue Xuebao, 2007, 10 (1378-1380):
  • [24] Study on Roll Wear Model for Hot Strip Mill
    Guo, Zhongfeng
    Hu, Junhong
    Sun, Xueyan
    ADVANCED ENGINEERING MATERIALS II, PTS 1-3, 2012, 535-537 : 697 - 700
  • [25] An FE Based On-line Model for the Prediction of Work Roll Thermal Profile in Hot Strip Rolling
    Choi, Ji Won
    Lee, Jung Hyeung
    Sun, Cheng Gang
    Hwang, Sang Moo
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 1126 - +
  • [26] CSN's strategy for roll performance improvement in the hot strip mill
    Pereira, W.A.
    Linhares, J.G.
    De, Azevedo, S.J.
    De, Carvalho, M.A.
    Da, Silva Pontes Filho, C.
    Xavier, R.R.
    Silva, C.H.
    Iron and Steelmaker (I and SM), 2002, 29 (09): : 37 - 40
  • [27] CSN's strategy for roll performance improvement in the hot strip mill
    Pereira, WA
    Linhares, JC
    de Azevedo, SJ
    de Carvalho, MA
    Pontes, CD
    Xavier, RR
    Silva, CH
    43RD MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 2001, 39 : 673 - 681
  • [28] Design and Application of Variable Contact Roll Contour on Backup Roll of Finishing Stand at a Hot Strip Mill
    Wang, Xiaodong
    Yang, Quan
    Li, Fei
    Li, Ming
    Yu, Wei
    Li, Bin
    Zhang, Baohui
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, : 377 - +
  • [29] ONLINE MEASUREMENT OF WORK ROLL PROFILE IN A HOT STRIP FINISHING MILL
    ICHIKAWA, F
    OKUNO, M
    ISHIKAWA, T
    TAKECHI, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1993, 79 (07): : 800 - 807
  • [30] Optimization of work roll lubrication at the hot strip mill. 1045
    Steiner, D.
    Liquet, D.
    Nicoloudis, G.
    Uijdebroeks, H.
    Depaepe, A.
    Herman, J.C.
    2001, La Revue de Metallurgie (98):
12345