Aluminum Nitride Films Fabricated by Mid-frequency Magnetron Sputtering

被引:0
|
作者
ZHONG Zhiqin
机构
关键词
AlN film; XRD; SEM; XPS; C-V characteristic;
D O I
暂无
中图分类号
O484.1 [薄膜的生长、结构和外延];
学科分类号
摘要
Aluminum nitride films were prepared by mid-frequency magnetron sputtering on Si (111) substrate. The grown films were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS) to obtain the structural and the chemical information. The polycrystalline thin films were in a hexagonal wurtzite structure having a (002) preferred orientation, along which the columnar grain structure was found. XPS study revealed the presence of oxygen and carbon contaminations, as well as the Al-rich nature of the film. Anomalous C-V characteristics of Al/AlN/n-Si capacitors were studied. The measured C-V curves show rolloffs in the accumulation region and voltage stresses cause both horizontal and vertical shifts of the C-V curves. These anomalous behaviors are mainly due to the large current conduction and the charge trapping in the Al-rich AlN layer.
引用
收藏
页码:127 / 131
页数:5
相关论文
共 50 条
  • [41] Effect of the deposition conditions on the properties of photocatalytic WO3 thin films prepared by mid-frequency magnetron sputtering
    Li, H.
    Mu, Z. X.
    Liu, S. G.
    Zhang, J. L.
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2019, 99 : 99 - 105
  • [42] Formation and transmittance property of WO3 films deposited by mid-frequency dual-target magnetron sputtering
    Wang, Li-ge
    Hu, Yuan-rong
    Li, Guo-qing
    Xie, Wei
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11): : 5063 - 5067
  • [43] Control of crystallographic structure of aluminum nitride films prepared by magnetron sputtering
    Leung, TT
    Ong, CW
    INTEGRATED FERROELECTRICS, 2003, 57 : 1201 - 1211
  • [44] Fluorocarbon Thin Films Fabricated using Carbon Nanotube/Polytetrafluoroethylene Composite Polymer Targets via Mid-Frequency Sputtering
    Kim, Sung Hyun
    Kim, Cheol Hwan
    Choi, Woo Jin
    Lee, Tae Gon
    Cho, Seong Keun
    Yang, Yong Suk
    Lee, Jae Heung
    Lee, Sang-Jin
    SCIENTIFIC REPORTS, 2017, 7
  • [45] Fluorocarbon Thin Films Fabricated using Carbon Nanotube/Polytetrafluoroethylene Composite Polymer Targets via Mid-Frequency Sputtering
    Sung Hyun Kim
    Cheol Hwan Kim
    Woo Jin Choi
    Tae Gon Lee
    Seong Keun Cho
    Yong Suk Yang
    Jae Heung Lee
    Sang-Jin Lee
    Scientific Reports, 7
  • [46] Phase evolution in aluminum nitride thin films on Si(100) prepared by radio frequency magnetron sputtering
    Choi, JH
    Lee, JY
    Kim, JH
    THIN SOLID FILMS, 2001, 384 (02) : 166 - 172
  • [47] Thick diamond-like carbon film deposited using mid-frequency magnetron sputtering
    Yu, Xiang
    Liu, Yang
    Wang, Chengbiao
    Yu, Deyang
    Run Hua Yu Mi Feng/Lubrication Engineering, 2006, (10): : 25 - 28
  • [48] Microstructures and Mechanical Properties of HfN Coatings Deposited by DC, Mid-Frequency, and ICP Magnetron Sputtering
    Chun, Sung-Yong
    CORROSION SCIENCE AND TECHNOLOGY-KOREA, 2023, 22 (06): : 393 - 398
  • [49] Photocatalytic degradation properties of titanium oxide film prepared by mid-frequency AC magnetron sputtering
    Hou, YQ
    Zhang, G
    Zhuang, DM
    Wu, MS
    JOURNAL OF INORGANIC MATERIALS, 2004, 19 (05) : 1073 - 1079
  • [50] Tin nitride thin films fabricated by reactive radio frequency magnetron sputtering at various nitrogen gas ratios
    Choi, Sujin
    Kang, Jisoo
    Park, Juyun
    Kang, Yong-Cheol
    THIN SOLID FILMS, 2014, 571 : 84 - 89