ISOTHERMAL SECTION OF W-Ni-Cu SYSTEM AT 1017℃

被引：0
|
作者：
QIU Caian JIN Zhanpeng HUANG Peiyun Central South University of Technology
in revised form 1 December 1987]
机构：
来源：
Acta Metallurgica Sinica(English Edition) | 1989年 / 08期
关键词：
W-Ni-Cu system; phase diagram; diffusion couple;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The isothermal section of the W-Ni-Cu ternary system at 1017℃ was determined by meansof diffusion couple specimens,EMPA and X-ray diffraction.Body-centeredtetragonal NiW and orthorhombic NiW but no NiWobserved in the W-Ni binary sys-tem at this temperature.The solubility ranges of W and Cu in NiW are 16.95-20.51 at.-% and 0-4.36 at.-%,respectively.The maximum solubility of W in γ(Ni) is13.11 at.-%.
引用
收藏
页码：105 / 108
页数：4
相关论文
共 50 条
  • [41] Isothermal section of the ternary Sn-Cu-Ni system and interfacial reactions in the Sn-Cu/Ni couples at 800 °C
    Wang, CH
    Chen, SW
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (10): : 2281 - 2287
  • [42] Dry Sliding Wear Behaviour and Microstructure of the W-Ni-Fe and W-Ni-Cu Heavy Alloys Produced by Powder Metallurgy Technique
    Kilic, M.
    Ozyurek, D.
    Tuncay, T.
    POWDER METALLURGY AND METAL CERAMICS, 2016, 55 (1-2) : 54 - 63
  • [43] Linking homogenization and densification in W-Ni-Cu alloys through master sintering curve (MSC) concepts
    Sethi, Guneet
    Park, Seong Jin
    Johnson, John L.
    German, Randall M.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04): : 688 - 695
  • [44] W-Ni-Cu重合金不平衡凝固与固溶强化
    李晋尧
    罗伯芳
    李秋娟
    理化检验(物理分册), 1998, (10) : 7 - 9
  • [45] 提高W-Ni-Cu合金膨胀系数等性能的实例分析
    王伏生
    周载明
    梁容海
    中国有色金属学报, 1997, (01) : 106 - 109
  • [46] W-Ni-Cu三元系相图的热力学计算
    邱才安
    金展鹏
    黄培云
    中南矿冶学院学报, 1989, (01) : 66 - 71
  • [47] 复合电沉积制备W-Ni-Cu梯度材料的组织及性能
    齐艳飞
    王波
    周景一
    李运刚
    田薇
    稀有金属材料与工程, 2017, 46 (12) : 3893 - 3896
  • [48] A study of silicon carbide reinforced W-Ni-Cu based heavy alloys sintered with different heating modes
    Annamalai, A. Raja
    Chaurasia, Jitender Kumar
    Srikanth, Muthe
    Agrawal, Dinesh K.
    Jen, Chun-Ping
    MATERIALS RESEARCH EXPRESS, 2020, 7 (12)
  • [49] Isothermal section at 927℃ of Cr-Ni-Ti system
    谭永恒
    徐洪辉
    杜勇
    Transactions of Nonferrous Metals Society of China, 2007, (04) : 711 - 714
  • [50] Process parameters and thermal physical properties of W-Ni-Cu composite fabricated using selective laser melting
    Yan A.-R.
    Liu X.-S.
    Wang Z.-Y.
    He D.-Y.
    Guangxue Jingmi Gongcheng/Optics and Precision Engineering, 2019, 27 (05): : 1024 - 1032
12345