Ratcheting Behavior of SA508-3 Steel at Elevated Temperature:Experimental Observation and Simulation

被引:3
|
作者
Jun Tian [1 ]
Yu Yang [1 ]
Li-Ping Zhang [1 ]
Xue-Jiao Shao [1 ]
Juan Du [1 ]
Qian-Hua Kan [2 ]
机构
[1] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China
[2] Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering,Southwest Jiaotong University
基金
中国国家自然科学基金;
关键词
Ratcheting; Constitutive model; Dynamic strain aging; Cyclic loading; Elevated temperature;
D O I
暂无
中图分类号
TG142.1 [钢的组织与性能];
学科分类号
080502 ;
摘要
A series of monotonic uniaxial tensile tests, strain-controlled and stress-controlled cyclic tests of SA508-3 steel were conducted from 25 to 350 ℃. Results showed that the steel exhibited temperature-dependent cyclic softening characteristic and obvious ratcheting behavior, and dynamic strain aging was observed in the range of 250–350 ℃. Based on experimental observations, a temperature-dependent cyclic plastic constitutive model was proposed by introducing the nonlinear cyclic softening and kinematic hardening rules, and the dynamic strain aging was also considered into the constitutive model. Comparisons between experiments and simulations were carried out to validate the proposed model at elevated temperature.
引用
收藏
页码:822 / 828
页数:7
相关论文
共 50 条
  • [31] Effect of neutron irradiation on magnetic properties in the low alloy Ni-Mo steel SA508-3
    Park, DG
    Kim, CG
    Kim, HC
    Hong, JH
    Kim, IS
    JOURNAL OF APPLIED PHYSICS, 1997, 81 (08) : 4125 - 4127
  • [32] SA508-3材料氮合金化工艺优化研究
    黄飞
    许耀先
    顾帮建
    安徽冶金科技职业学院学报, 2024, 34 (02) : 10 - 12
  • [33] Evaluation of thermal recovery of neutron-irradiated SA508-3 steel using magnetic property measurements
    Duck-Gun Park
    Jun-Hwa Hong
    In-Sup Kim
    H. C Kim
    Journal of Materials Science, 1997, 32 : 6141 - 6146
  • [34] Analysis of microstructure and performance of temper bead welded joints for SA508-3 steel by Quenching and Tempering mode
    秦建
    李世乾
    吕晓春
    张汇文
    杜兵
    China Welding, 2017, 26 (01) : 15 - 20
  • [35] Evaluation of thermal recovery of neutron-irradiated SA508-3 steel using magnetic property measurements
    Korea Atomic Energy Research Inst, Taejon, Korea, Republic of
    J Mater Sci, 23 (6141-6146):
  • [36] Analysis on continuous cooling transformation curves of simulated heat affected zone for SA508-3 steel in nuclear power
    Chi, Luxin
    Ma, Yonglin
    Xing, Shuqing
    Zhao, Yongtao
    Chen, Furong
    Chen, Zhongyi
    Hanjie Xuebao/Transactions of the China Welding Institution, 2011, 32 (05): : 61 - 64
  • [37] Prediction and formation mechanism of serrated chips in cutting of SA508-3 steel under enhanced cooling and lubrication environments
    Wang, Qinqiang
    Zhao, Yong
    Zhang, Chao
    Xu, Haojie
    Xu, Bin
    Wei, Zhaocheng
    Kang, Chengwei
    Li, Dianzhong
    Guo, Jiang
    TRIBOLOGY INTERNATIONAL, 2024, 200
  • [38] Effects of hot deformation and heat treatment on grain refinement for as-cast and spray formed SA508-3 steel
    Sui D.-S.
    Zhang H.-M.
    Liu J.
    Liu M.-X.
    Wu J.-J.
    Cui Z.-S.
    Sui, Da-Shan (dasui@sjtu.edu.cn), 1600, Inderscience Publishers, 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (09): : 223 - 236
  • [39] Uniaxial ratcheting behavior of polytetrafluoroethylene at elevated temperature
    Zhang, Zhe
    Chen, Xu
    Wang, Yanping
    POLYMER TESTING, 2010, 29 (03) : 352 - 357
  • [40] Hydrogen embrittlement behavior of SA508-Ⅲ steel
    Liu, Jia-Hua
    Wang, Lei
    Liu, Yang
    Song, Xiu
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2015, 36 (01): : 29 - 32