普通混凝土HJC本构模型参数确定

被引:52
|
作者
任根茂 [1 ]
吴昊 [1 ]
方秦 [1 ]
周建伟 [2 ]
龚自明 [1 ]
机构
[1] 解放军理工大学爆炸冲击防灾减灾国家重点实验室
[2] 南京军区空军勘察设计院
关键词
普通混凝土; 本构模型; 数值模拟; 侵彻; 贯穿;
D O I
10.13465/j.cnki.jvs.2016.18.002
中图分类号
TU528 [混凝土及混凝土制品];
学科分类号
摘要
Holmquist-Johnson-Cook(HJC)本构模型广泛应用于冲击爆炸作用下混凝土类材料的动态响应分析中。基于已有普通混凝土(单轴抗压强度≤60 MPa)的准静态单轴压缩实验、三轴围压实验、一维SHPB实验和一维平面应变Hugoniot冲击压缩实验数据,确定了一组适用于不同强度普通混凝土材料HJC本构模型的强度参数、率效应参数和状态方程参数取值。基于上述确定参数值通过LS-DYNA有限元分析软件,对十五组普通混凝土(单轴抗压强度13.5~58.4MPa)靶体的刚性弹体侵彻贯穿实验进行了数值模拟。通过与实验中弹体侵彻深度,贯穿残余速度以及弹体过载和靶内径向应力时程结果对比,验证了所确定模型参数的准确性。
引用
收藏
页码:9 / 16
页数:8
相关论文
共 20 条
  • [11] 冲击荷载作用下混凝土动力性能试验研究及有限元分析[D]. 帅晓蕾.湖南大学. 2013
  • [12] 三轴应力状态下混凝土强度研究[D]. 侯正纲.河北工业大学. 2006
  • [13] JGJ 55-2011. 普通混凝土配合比设计规程[S]. 2011
  • [14] Hard projectile perforation on the monolithic and segmented RC panels with a rear steel liner[J] . H. Wu,Q. Fang,Y. Peng,Z.M. Gong,X.Z. Kong.International Journal of Impact Engineering . 2015
  • [15] Numerical simulations of oblique penetration into reinforced concrete targets[J] . Yan Liu,Fenglei Huang,Aie Ma.Computers and Mathematics with Applications . 2010 (8)
  • [16] Penetration of concrete targets with deceleration-time measurements[J] . M.J. Forrestal,D.J. Frew,J.P. Hickerson,T.A. Rohwer.International Journal of Impact Engineering . 2002 (5)
  • [17] Behaviour of quasi-brittle material at high strain rate. Experiment and modelling[J] . Gérard Gary,Patrice Bailly.European Journal of Mechanics / A Solids . 1998 (3)
  • [18] Penetration of concrete targets with ogive-nose steel rods
    Frew, DJ
    Hanchak, SJ
    Green, ML
    Forrestal, MJ
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1998, 21 (06) : 489 - 497
  • [19] In-target radial stress measurements from penetration experiments into concrete by ogive-nose steel projectiles
    Gran, JK
    Frew, DJ
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1997, 19 (08) : 715 - 726
  • [20] Penetration of grout and concrete targets with ogive-nose steel projectiles
    Forrestal, MJ
    Frew, DJ
    Hanchak, SJ
    Brar, NS
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1996, 18 (05) : 465 - 476