Evolution of wetted and corroded areas on 8Cr4Mo4V bearing steel exposed to salt water contaminated lubricant oil

被引：1

作者：

He, Wanjun ^{[1
]}

Zeng, Qunfeng ^{[1
]}

Xiao, Qi ^{[2
]}

Pang, Zeming ^{[1
]}

Wu, Yang ^{[3
]}

Yan, Chao ^{[4
]}

Huang, Shan ^{[2
]}

Zhuang, Jian ^{[1
]}

Wang, Jiahe ^{[1
]}

Li, Haolin ^{[1
]}

Wei, Xunkai ^{[5
]}

机构：

[1] Xi An Jiao Tong Univ, Inst Design Sci & Basic Components, Sch Mech Engn, Xian 710049, Peoples R China

[2] Nanning Normal Univ, Coll Chem & Mat, Nanning 530001, Peoples R China

[3] Beijing Univ Technol, Fac Mat & Mfg, Beijing 100124, Peoples R China

[4] North Univ China, Shanxi Prov Key Lab Adv Mfg Technol, Taiyuan 030051, Peoples R China

[5] Beijing Aeronaut Engn Tech Res Ctr, Beijing 100076, Peoples R China

来源：

CORROSION SCIENCE | 2024年 / 241卷

基金：

中国国家自然科学基金;

关键词：

8Cr4Mo4V bearing steel; Salt water contaminated lubricant oil; Monte Carlo simulation; Wetted and corroded areas; Time-dependent distribution; CORROSION BEHAVIOR; M50; STEEL; IN-SITU; FILIFORM CORROSION; CARBON STEEL; RAMAN; IRON; MICROSTRUCTURE; IDENTIFICATION; SPECTROSCOPY;

D O I：

10.1016/j.corsci.2024.112515

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Relationship between wetted and corroded areas on 8Cr4Mo4V bearing steel during exposure to salt water contaminated lubricant oil was explored by Monte Carlo simulation and corrosion experiment. Results show that locally corroded areas are initially scattered then connected and eventually merged due to droplet coalescence, and are resulted from galvanic, uniform and filiform corrosions, respectively. Droplet coalescence also redistributes wetted areas and activates de-wetting which interrupts transformation towards corrosion. Role of droplet coalescence in evolution of corroded areas is addressed. Combining two Monte Carlo models varied with droplet relaxation helps to predict the corroded areas' distribution after long-term exposure.

引用

页数：21

共 50 条

[21] New layering strategy and the gradient microstructure distribution of surface metamorphic layer for 8Cr4Mo4V steel by grinding
Zhang, Bohan
Liu, Haitao
Zhang, Mingliang
Dai, Chuyan
Xie, Zhenwei
Ma, Xinxin
Sun, Yazhou
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (01)
[22] 8Cr4Mo4V材料钢球滚动接触疲劳试验研究
杨晓峰
于庆杰
王文雪
韩松
李正辉
沙磊
宋阿开
失效分析与预防, 2021, 16 (05) : 295 - 299
[23] 喷砂处理对8Cr4Mo4V钢表面状态的影响
魏英华
袁晓光
安敏
周驰滨
于兴福
航空制造技术, 2019, 62 (21) : 40 - 46
[24] Droplet size dependent localized corrosion evolution of M50 bearing steel in salt water contaminated lubricant oil
He, Wanjun
Zeng, Qunfeng
Cheng, Lei
Zhu, Jianing
Wang, Zhao
Zhuang, Jian
Wei, Xunkai
CORROSION SCIENCE, 2022, 208
[25] Effects of microstructure and nanohardness of the 8Cr4Mo4V steel under high-dose-rate N-PIII
Miao, Bin
Zhang, Xinghong
Ma, Xinxin
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2023, 101 (05): : 275 - 280
[26] Characterization of vein-like structures formed in nitrided layers during plasma nitriding of 8Cr4Mo4V steel
Niu, J. B.
Zhang, X. H.
Ma, X. X.
Liu, Y.
Wang, L. Q.
Wu, T. B.
MATERIALIA, 2022, 22
[27] Optimization of Heat Treatment Process Parameters for 8Cr4Mo4V Bearing Ring Using FEA-NN- PSO Method
Xia, Tao
Chen, Yixin
Song, Tianpeng
Cui, Puchang
Liu, Yong
Zhu, Jingchuan
METALS AND MATERIALS INTERNATIONAL, 2025,
[28] 8Cr4Mo4V钢制轴承外圈仿形辗扩工艺改进
王战冶
王超
陈辉
哈尔滨轴承, 2018, 39 (02) : 51 - 52+55
[29] 8Cr4Mo4V异形滚子盐浴软氮化工艺试验
刘汇河
宋海涛
姚颖才
李付伟
张艺
轴承, 2020, (04) : 15 - 18
[30] 8Cr4Mo4V钢大尺寸轴承外圈锻造金属流线控制
姜宏伟
孙慧广
王铄
闫国斌
轴承, 2024, (11) : 31 - 36

← 1 2 3 4 5 →