Study on Shear Postbuckling and Failure of Perforated Plates: Modeling and Experiments

被引:0
|
作者
Li, Yuan [1 ]
Li, Wei [2 ]
Li, Dong [3 ]
Huang, Bao-Zong [3 ]
机构
[1] Northeastern Univ, Coll Sci, Dept Mech, Shenyang 110819, Peoples R China
[2] AVIC Shenyang Aircraft Design & Res Inst, Dept Comprehens Strength, Shenyang 110000, Peoples R China
[3] Northeastern Univ, Coll Sci, Shenyang 110819, Peoples R China
关键词
Stress Concentration; Numerical Interpolation; Finite Element Analysis; Structural Analysis; Newton Raphson Method; Stress-Strain Analysis; Plastic Deformation; Structural Design and Development; Mechanical Testing; LAMINATED COMPOSITE PLATES; BUCKLING BEHAVIOR; SANDWICH PLATES; FINITE-ELEMENT; REINFORCEMENT DESIGN; CESAREAN-SECTION; HOLE; CUTOUT; PANELS; STRESS;
D O I
10.2514/1.J064246
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Based on the Kirchhoff-Karman nonlinear theory, the postbuckling bearing capacity (PBC) of perforated plates under shearing load was studied and compared using a self-developed quasi-conforming element program with singular point identification and switching approach. The influences of geometric parameters on the PBC were analyzed. During calculation, the edge beams were introduced to simulate effects of boundary on PBC. The perforated plates were manufactured and tested to verify the accuracy of the numerical results. The results show that the influence of in-plane constraints along the normal of edges on the PBC is more significant. The PBC increases with the increase of plate thickness but is not sensitive to the change of the hole's location. The reinforcement can reduce the stress concentration and increase the PBC by 7-133%. The PBC is greatly affected by the aperture D, and it is found that the optimal aperture D* exists when the side length a is constant. The PBC under the optimal aperture is higher than that under other apertures. To facilitate the optimization design, a more refined geometric parameter library is provided by the least-squares method combined with the linear interpolation method. The interpolation results are verified by the existing numerical results.
引用
收藏
页数:9
相关论文
共 50 条
  • [21] Research on shear performance of perforated aluminium alloy plates
    Guo X.
    Ji L.
    Liu J.
    Luo J.
    Ouyang H.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2023, 44 (08): : 185 - 195
  • [22] Exact strip postbuckling analysis of composite plates under compression and shear
    Zhao, K.
    Kennedy, D.
    Featherston, C. A.
    AERONAUTICAL JOURNAL, 2019, 123 (1263): : 658 - 677
  • [23] TRANSVERSE-SHEAR EFFECTS ON BUCKLING AND POSTBUCKLING OF LAMINATED AND DELAMINATED PLATES
    CHEN, HP
    AIAA JOURNAL, 1993, 31 (01) : 163 - 169
  • [24] Postbuckling behaviour of anisotropic laminated composite plates due to shear loading
    Balamurugan, V
    Ganapathi, M
    Patel, BP
    DEFENCE SCIENCE JOURNAL, 1998, 48 (04) : 433 - 440
  • [25] Postbuckling analysis of circular plates with axisymmetric delamination and transverse shear deformability
    Chen, De-Liang
    Fu, Yi-Ming
    Gongcheng Lixue/Engineering Mechanics, 2006, 23 (01): : 17 - 22
  • [26] Buckling and postbuckling of shear-deformable rectangular plates of composite construction
    Lin, ZQ
    Zhang, JW
    THIN-WALLED STRUCTURES, 1996, 26 (03) : 213 - 221
  • [27] Thermomechanical postbuckling of imperfect shear deformable laminated plates on elastic foundations
    Shen, HS
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2000, 189 (03) : 761 - 784
  • [28] Thermal postbuckling of shear-deformable laminated plates with piezoelectric actuators
    Shen, HS
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (13) : 1931 - 1943
  • [29] MODELING OF A PULSED EXTRACTION COLUMN WITH PERFORATED PLATES
    BAUERMANN, HD
    BLASS, E
    CHEMIE INGENIEUR TECHNIK, 1977, 49 (02) : 175 - 175
  • [30] Insights into the weep performance and modeling of perforated plates
    Wang, Jun
    Yao, XiuYing
    Chen, Tao
    Huang, ChuanXiang
    Sun, XueNi
    Shao, Hui
    Leng, YiXin
    Peng, Chong
    Zhong, Jing
    Jiang, JunCheng
    AICHE JOURNAL, 2022, 68 (09)