Characterization of Additively Manufactured Titanium-Based Alloy with a Micro-Arc Oxidation Coating and Overlying Polyurethane Layer

Titanium alloys are widely used in the aerospace, automotive, chemical, and biomedical industries due to their excellent corrosion resistance, mechanical properties, and biocompatibility. However, the surface properties of titanium alloys are often insufficient to meet the increasingly complex requirements of certain applications. Therefore, enhancing the surface performance of titanium alloys in physiological environments has become a key focus of research. In this study, a porous oxide layer was generated on the surface of a titanium substrate through micro-arc oxidation (MAO). This layer served as an intermediate layer for a subsequently deposited polyurethane (PU) coating, providing a strong foundation for adhesion. The high porosity of the MAO layer not only facilitated the adhesion of the PU coating but also protected the titanium alloy, further enhancing its corrosion resistance. The surface microstructure after MAO treatment and the morphological changes after application of the PU coating were characterized using scanning electron microscopy. The PU layer uniformly covered the surface of the MAO layer, significantly improving the smoothness and uniformity of the surface. The increase in surface smoothness due to the PU coating on top of the MAO layer was verified through white light interferometry. Additionally, surface hydrophobicity was assessed through water contact angle measurements. The PU layer over the MAO coating significantly enhanced the hydrophobicity of the titanium alloy's surface, which is crucial for reducing biofouling and improving the effectiveness of biomedical implants. Finally, electrochemical analysis was conducted to study the corrosion resistance of the titanium alloy after MAO and PU treatment. The titanium alloy with an MAO-PU composite coating exhibited the highest corrosion resistance. The findings revealed that the combination of the MAO layer and PU coating provides an excellent multifunctional protective layer for titanium alloys, not only enhancing their durability but also their ability to adapt to physiological and harsh environments.