Design and Development of Sensing Unit for Wire Rope Tester

被引：0

作者：

Sharma, Sukesha ^{[1
]}

Sharma, Manu ^{[1
]}

Garg, Nitika ^{[1
]}

Kaur, Akshpreet ^{[1
]}

Sapra, Gaurav ^{[1
]}

Aggarwal, Naveen ^{[1
]}

Goswami, J. K. ^{[1
]}

机构：

[1] Panjab Univ, UIET, Chandigarh, India

来源：

IETE JOURNAL OF RESEARCH | 2025年 / 71卷 / 01期

关键词：

Hall sensors; NDT; PCB design; RC filter; Sensing unit; Wire rope tester; DEFECTS; FAILURE; SIGNALS; NDT;

D O I：

10.1080/03772063.2024.2409716

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this work, a sensing unit on a Printed Circuit Board (PCB) has been designed to house hall sensors. Hall sensors are used to capture leakage flux signals from magnetized wire ropes for Non-Destructive Testing (NDT) of wire ropes. Various parameters are optimized before designing PCB, such as: Lift-off, orientation of sensor, number of hall sensors. Hall sensor signals are captured using DAQ card of NI (R) and program is written in LABVIEW (R) software. System is designed for: reducing noise in acquired signal (using RC filter), decreasing the number of channels for data acquisition system, reducing system cost and maintain signal fidelity.

引用

页码：211 / 223

页数：13

共 50 条

[41] EFFECTIVE LENGTH OF A FRACTURED WIRE IN WIRE ROPE
CHIEN, CH
COSTELLO, GA
JOURNAL OF ENGINEERING MECHANICS-ASCE, 1985, 111 (07): : 952 - 961
[42] Optimum design and selection of wire rope for hot rolling shop applications
Krishan Kumar
Sube Singh
S. S. Banwait
OPSEARCH, 2021, 58 : 29 - 53
[43] Design and Simulation Analysis of Detection Sensor of Localized Faults for Wire Rope
Wu, Bo
Li, Guoping
PROCEEDINGS OF THE 2015 4TH INTERNATIONAL CONFERENCE ON COMPUTER, MECHATRONICS, CONTROL AND ELECTRONIC ENGINEERING (ICCMCEE 2015), 2015, 37 : 1067 - 1071
[44] Design and Test of Wire Rope Damage Test Platform for Orchard Transporter
Ouyang Y.
Sun H.
Hong T.
Shu S.
Chen D.
Wu Z.
Hong, Tiansheng (tshong@scau.edu.cn), 1600, Chinese Society of Agricultural Machinery (51): : 118 - 128
[45] Abrasion degradation of wire rope and synthetic fiber rope
Shuto, Y
Tokunaga, Y
Mriya, T
Kagoyama, T
Hara, S
Yamakawa, K
OCEANS '04 MTS/IEEE TECHNO-OCEAN '04, VOLS 1- 2, CONFERENCE PROCEEDINGS, VOLS. 1-4, 2004, : 1918 - 1922
[46] LARGE WIRE ROPE MOORING WINCH DRUM ANALYSIS AND DESIGN CRITERIA
SONG, KK
RAO, GP
CHILDERS, MA
SOCIETY OF PETROLEUM ENGINEERS JOURNAL, 1980, 20 (02): : 63 - 74
[47] Simulation-Based Optimal Design System for Steel Wire Rope
Du Su-zhong
Pang Ha-li
2008 CHINESE CONTROL AND DECISION CONFERENCE, VOLS 1-11, 2008, : 857 - 860
[48] Optimum design and selection of wire rope for hot rolling shop applications
Kumar, Krishan
Singh, Sube
Banwait, S. S.
OPSEARCH, 2021, 58 (01) : 29 - 53
[49] Development of Natural Draft Cooling Towers of Prestressed Wire-Rope Network Construction of Aerodynamic Design.
Braun, R.
Jasch, E.
Technische Mitteilungen Krupp, Werksberichte, 1975, 33 (01): : 23 - 40
[50] Development of an itelligent test-measurement meter for wire rope tension
Jixie Kexue Yu Jishu, 1 (101):

← 1 2 3 4 5 →