Influence of Tool Wear and Workpiece Diameter on Surface Quality and Prediction of Surface Roughness in Turning

被引:0
|
作者
Li, Chunxiao [1 ]
Zhao, Guoyong [2 ]
Ji, Dong [1 ]
Zhang, Guangteng [1 ]
Liu, Limin [1 ]
Zeng, Fandi [1 ]
Zhao, Zhihuan [1 ]
机构
[1] Shandong Agr & Engn Univ, Coll Mech & Elect Engn, Jinan 250100, Peoples R China
[2] Shandong Univ Technol, Coll Mech Engn, Zibo 255000, Peoples R China
关键词
surface roughness; tool wear; workpiece diameter; response surface method; support vector machine; OPTIMIZATION; PARAMETERS; MODEL;
D O I
10.3390/met14111205
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In turning, tool wear and cutting vibration are inevitable, which have great influence on surface quality. Analyzing the influence mechanism of tool wear and cutting vibration on surface quality is important to achieve the accurate prediction of surface roughness before machining and improve machining quality. In this paper, a turning vibration experiment is conducted to reveal that the diameter of shafts is an important factor affecting the vibration amplitude and frequency. In addition, based on machining parameters, tool wear and workpiece diameter, this empirical model, the response surface method and a support vector machine are used to model and predict surface roughness. The fitting accuracy, prediction accuracy and generalization performance of the proposed methods are compared in detail. The results show that the response surface modeling method has the highest fitting accuracy, but the exponential empirical modeling method has the highest prediction accuracy and best generalization performance. Additionally, the prediction results indicate that the surface roughness increases with the increase in tool wear and decreases with the increase in workpiece diameter.
引用
收藏
页数:20
相关论文
共 50 条
  • [21] Tool wear and surface roughness in turning AISI 8620 using coated ceramic tool
    Thamizhmanii, S.
    Kamarudin, K.
    Rahim, E. A.
    Saparudin, A.
    Hassan, S.
    WORLD CONGRESS ON ENGINEERING 2007, VOLS 1 AND 2, 2007, : 1157 - +
  • [22] An experimental study on the effect of tool geometry on tool wear and surface roughness in hard turning
    Pham Minh Duc
    Le Hieu Giang
    Mai Duc Dai
    Do Tien Sy
    ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (09)
  • [23] TOOL VIBRATION AND ITS INFLUENCE ON SURFACE-ROUGHNESS IN TURNING
    SELVAM, MS
    WEAR, 1975, 35 (01) : 149 - 157
  • [24] INFLUENCE ON SURFACE-ROUGHNESS IN TURNING WITH ULTRASONIC VIBRATION TOOL
    WANG, LJ
    JI, Z
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1987, 27 (02): : 181 - 190
  • [25] The dependence of tool overhang on surface quality and tool wear in the turning process
    Murat Kiyak
    Billur Kaner
    Ibrahim Sahin
    Bilal Aldemir
    Orhan Cakir
    The International Journal of Advanced Manufacturing Technology, 2010, 51 : 431 - 438
  • [26] The dependence of tool overhang on surface quality and tool wear in the turning process
    Kiyak, Murat
    Kaner, Billur
    Sahin, Ibrahim
    Aldemir, Bilal
    Cakir, Orhan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (5-8): : 431 - 438
  • [27] Tool Wear, Chip Formation and Workpiece Surface Issues in CBN Hard Turning: A Review
    Dogra, Manu
    Sharma, Vishal S.
    Sachdeva, Anish
    Suri, Narinder Mohan
    Dureja, Jasminder Singh
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2010, 11 (02) : 341 - 358
  • [28] Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review
    Manu Dogra
    Vishal S. Sharma
    Anish Sachdeva
    Narinder Mohan Suri
    Jasminder Singh Dureja
    International Journal of Precision Engineering and Manufacturing, 2010, 11 : 341 - 358
  • [29] Experimental investigation of the effects of workpiece diameter and overhang length on the surface roughness in turning of free machining steel and modelling of surface roughness by using ANFIS
    Dere, Mustafa
    Filiz, I. Huseyin
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2019, 34 (02): : 676 - 686
  • [30] Multi Objective Optimization of Surface Roughness and Workpiece Surface Temperature in Turning Operation
    Nooraziah, Ahmad
    Tiagrajah, V. Janahiraman
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 376 - +