Mechanical spectroscopy study of recrystallization in Al-Ni alloys

被引：0
|
作者：
Palacheva, V. V. [1 ]
Mochugovskiy, A. G. [1 ]
Zadorozhnyy, M. Yu. [1 ,2 ]
Mikhaylovskaya, A. V. [1 ]
Golovin, I. S. [1 ]
机构：
[1] Natl Univ Sci & Technol MISIS, Leninsky Ave 4-1, Moscow 119049, Russia
[2] Moscow Polytech Univ, B Semenovskay 38, Moscow 107023, Russia
来源：
MATERIALS LETTERS | 2025年 / 389卷
关键词：
Recrystallization; Internal friction; Grain structure; Particles; Degree of deformation; INTERNAL-FRICTION; GRAIN-BOUNDARY; MG; PHASE;
D O I：
10.1016/j.matlet.2025.138344
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The recrystallization behavior of cold-rolled Al-(0.04-6.0)%Ni alloys was studied using mechanical spectroscopy, microstructural studies, and hardness measurements. Temperature dependencies of internal friction at heating demonstrate a 'pseudo' peak related to recrystallization start temperature. An increase of Al3Ni particles fraction from 0.1 to 7-10 % decreases recrystallization start temperature from 297 to 210 degrees C and provides significant grain refinement due to particle-stimulated nucleation mechanism. The hardness and microstructure evolutions during heating exhibit a strong correlation with temperature and time dependent internal friction behavior. The Avrami model was applied to compare the recovery and recrystallization behavior of the studied alloys.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] THE EFFECT OF UNDERCOOLING ON THE MICROSTRUCTURE OF HYPEREUTECTIC AL-NI AND AL-CO ALLOYS
    STANLEY, JT
    FRASER, HL
    JOURNAL OF METALS, 1984, 36 (07): : 14 - 14
  • [42] Local structure in liquid binary Al-Cu and Al-Ni alloys
    Brillo, J.
    Bytchkov, A.
    Egry, I.
    Hennet, L.
    Mathiak, G.
    Pozdnyakova, I.
    Price, D. L.
    Thiaudiere, D.
    Zanghi, D.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2006, 352 (38-39) : 4008 - 4012
  • [43] Thermal Explosion in Al-Ni System: Influence of Mechanical Activation
    White, Jeremiah D. E.
    Reeves, Robert V.
    Son, Steven F.
    Mukasyan, Alexander S.
    JOURNAL OF PHYSICAL CHEMISTRY A, 2009, 113 (48): : 13541 - 13547
  • [44] Explosion hazard and prevention of Al-Ni mechanical alloy powders
    Jiang, Haipeng
    Bi, Mingshu
    Zhang, Jiankan
    Zhao, Fengqi
    Wang, Jiaying
    Sun, Fang
    Xiao, Qiuping
    Gao, Wei
    JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2022, 75
  • [45] Mechanical spectroscopy in Cu-Al-Zn and Cu-Al-Ni alloys
    Kostrubiec, B
    Rasek, J
    Wisniewski, R
    Morawiec, H
    MECHANICAL SPECTROSCOPY II, PROCEEDINGS, 2003, 89 : 287 - 292
  • [46] THE MECHANICAL-BEHAVIOR OF DIRECTIONALLY SOLIDIFIED AL-NI IN COMPRESSION
    TAO, S
    EMBURY, JD
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (03): : 713 - 719
  • [47] MICROSEGREGATION MODELING OF MULTIPLE PHASE TRANSFORMATIONS - ATOMIZATION OF AL-NI ALLOYS
    Tourret, Damien
    Gandin, Charles-Andre
    MODELING OF CASTING, WELDING, AND ADVANCED SOLIDIFICATION PROCESSES - XII, 2009, : 603 - 611
  • [48] Effects of Ni content on microstructure and performance of MAO coatings on binary Al-Ni alloys
    Li, Kang
    Zhang, Guoge
    Chen, Ken
    Li, Wenfang
    Zhu, Zhisheng
    Huang, Yi
    Zhu, Wen
    Liao, Zhongmiao
    Wan, Bingbing
    Liang, Jun
    Yang, Jiajing
    Liang, Rujian
    Liu, Yuandong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 28 : 3597 - 3608
  • [49] In situ XRD studies on Al-Ni and Al-Ni-Sr alloys prepared by rapid solidification
    Saksl, K.
    Vojtech, D.
    Durisin, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 464 (1-2) : 95 - 100
  • [50] Tensile properties of hypoeutectic Al-Ni alloys: Experiments and FE simulations
    Sankanit, P.
    Uthaisangsuk, V.
    Pandee, P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 889
12345