Influence of Spaying Parameters on the Property of Detonation Coatings Based on Ta

被引：0
|
作者：
Kakimzhanov, D. N. [1 ]
Satbayeva, Z. A. [1 ,2 ]
Dautbekov, M. K. [1 ]
Turabekov, Y. S. [1 ]
Kuanyshbay, R. M. [1 ]
Rustemov, A. S. [1 ]
机构：
[1] PlasmaScience LLP, Ust Kamenogorsk, Kazakhstan
[2] Shakarim Univ, Semey, Kazakhstan
来源：
BULLETIN OF THE UNIVERSITY OF KARAGANDA-PHYSICS | 2025年 / 1卷 / 117期
关键词：
detonation spraying; hardness; tantalum; corrosion; structure; coating; tribology; REFRACTORY-METALS;
D O I：
10.31489/2025PH1/53-59
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
This paper investigates the influence of sputtering parameters on the properties of tantalum-based detonation coatings. One of the key parameters in sputtering is the volume of barrel filling, which affects the properties of the resulting coatings. Tantalum coatings were produced at various levels of barrel filling with explosive gas, specifically at 50-70% fill levels. The results demonstrated that the roughness of the coatings decreases as the barrel fill volume increases, leading to coatings with a more homogeneous structure. Additionally, the tests revealed that coatings produced at 60% fill exhibited superior corrosion resistance compared to the other samples. Based on these findings, the optimal barrel fill level for explosive gas was determined.
引用
收藏
页码：53 / 59
页数：7
相关论文
共 50 条
  • [31] Influence of process variables on the quality of detonation gun sprayed alumina coatings
    Saravanan, P
    Selvarajan, V
    Rao, DS
    Joshi, SV
    Sundararajan, G
    SURFACE & COATINGS TECHNOLOGY, 2000, 123 (01): : 44 - 54
  • [32] Heating and Time Processes on Growth and Adhesive Property of Ta-Mo Coatings
    Ji, Xin
    Wang, Lin Jun
    Zhang, Chao Min
    Mi, Yi Ming
    MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (09) : 1269 - 1273
  • [33] Influence of Nb and Ta on the corrosion and mechanical properties of CrYN coatings
    Yaylali, Banu
    Gulten, Gokhan
    Efeoglu, Ihsan
    Totik, Yasar
    Kelly, Peter
    Kulczyk-Malecka, Justyna
    SURFACE & COATINGS TECHNOLOGY, 2024, 476
  • [34] Influence of the initial pressure in bubble media on the detonation wave parameters
    Sychev, A. I.
    TECHNICAL PHYSICS, 2015, 60 (04) : 603 - 606
  • [35] Influence of high energetic components on detonation parameters of emulsion explosives
    Maranda, A
    Grzyb, A
    Lipinska, K
    Lipinski, M
    Theory and Practice of Energetic Materials, Vol 6, 2005, : 565 - 570
  • [36] Influence of the initial pressure in bubble media on the detonation wave parameters
    A. I. Sychev
    Technical Physics, 2015, 60 : 603 - 606
  • [37] THE FEATURES OF DETONATION SPRAYING TECHNOLOGY FOR TUNGSTEN CARBIDE BASED COATINGS
    Baldaev, Lev Kh
    Khamitsev, Boris G.
    Baldaev, Sergey L.
    Prokofiev, Mikhail, V
    PERIODICO TCHE QUIMICA, 2019, 16 (32): : 739 - 754
  • [38] Influence of pulse plasma treatment on the phase composition and microhardness of detonation coatings based on Ti-Si-C
    Rakhadilov, B. K.
    Buitkenov, D. B.
    Adilkhanova, M.
    Sagdoldina, Zh B.
    Kurbanbekov, Sh R.
    BULLETIN OF THE UNIVERSITY OF KARAGANDA-PHYSICS, 2021, 2 (102): : 33 - 39
  • [39] The Influence of Galvanizing Parameters on the Structural Development of Zn-Al-Based Coatings
    Tiron, E. L.
    Crisan, A.
    Bedo, T.
    Stoicanescu, M.
    Pop, M. A.
    Cristea, D.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (09) : 4548 - 4560
  • [40] The Influence of Galvanizing Parameters on the Structural Development of Zn-Al-Based Coatings
    E. L. Tiron
    A. Crisan
    T. Bedő
    M. Stoicanescu
    M. A. Pop
    D. Cristea
    Journal of Materials Engineering and Performance, 2018, 27 : 4548 - 4560
12345