OPTIMIZATION OF SURFACE ROUGHNESS OF ALUMINIUM 6013-T6 ALLOY IN THE TURNING PROCESS

被引:0
|
作者
Eksi, Secil [1 ]
Karakaya, Cetin [2 ]
机构
[1] Sakarya Univ, Muhendislik Fak, Makine Muhendisligi Bolumu, Sakarya, Turkiye
[2] Innovat Ctr, Highfield Dr, St Leonards On Sea TN38 9UH, E Sussex, England
来源
KONYA JOURNAL OF ENGINEERING SCIENCES | 2022年 / 10卷 / 02期
关键词
Turning; Surface roughness; Optimization; Taguchi method; CUTTING PARAMETERS; MACHINING PARAMETERS; WEAR BEHAVIOR; TOOL WEAR; STEEL; D2; PREDICTION; GEOMETRY; HARDNESS;
D O I
10.36306/konjes.1064663
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
One of the most common methods of machining is turning. Cutting speed, depth of cut, and feed rate are the most effective cutting parameters on the surface roughness. In addition to cutting parameters, the use of cooling type, the cutting tool is also essential on the surface roughness of materials. In this study, the surface roughness properties of Al 6013-T6 material were investigated depending on feed rate and cutting speed in turning process. Experiments were planned according to L9 orthogonal array. Optimum conditions were found via Taguchi's Signal/Noise analysis. Variance analysis (ANOVA) was performed to determine the parameters that affect the turning process. As a result of experimental studies surface roughness values increased as feed rate increased and decreased as cutting speed increased. The analysis results showed that feed rate is a dominant parameter on surface roughness. It was also observed that the cutting parameters had a significant effect on the machining time. As the machining time decreases, the surface roughness increases.
引用
收藏
页码:337 / 345
页数:9
相关论文
共 50 条
  • [31] Al-6013-T6 and Al-7075-T7351 alloy anodes for aluminium-air battery
    Mutlu, Rasiha Nefise
    Ates, Sevgi
    Yazici, Birgul
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (36) : 23315 - 23325
  • [32] Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology
    Yusuf, Muhammad
    Ariffin, M. K. A.
    Ismail, N.
    Sulaiman, S.
    MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 1561 - 1565
  • [33] Effect of excimer laser surface treatment on corrosion behaviour of aluminium alloy 6013
    Chan, CP
    Yue, TM
    Man, HC
    MATERIALS SCIENCE AND TECHNOLOGY, 2002, 18 (05) : 575 - 580
  • [34] Assessment of surface roughness model for turning process
    Hadi, Yasir
    Ahmed, Salah Gasim
    Knowledge Enterprise: Intelligent Strategies in Product Design, Manufacturing, and Management, 2006, 207 : 152 - 158
  • [35] Statistical modelling of surface roughness of aluminium alloy and brass alloy
    Simunovic, K.
    Simunovic, G.
    Saric, T.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2013, 44 (07) : 618 - 625
  • [36] Effect of ball-burnishing parameters on surface roughness and surface hardness of aluminum alloy 6013
    Buldum, Berat Baris
    Bayhan, Burhan
    MATERIALS TESTING, 2018, 60 (04) : 418 - 422
  • [37] Ultra-precision Turning Process of 6061 Aluminum Alloy Based on Multi-objective Optimization of Surface Roughness and Reflectivity
    Wang G.
    Jin G.
    Li Z.
    Tan H.
    Zhan Q.
    Lin H.
    Wang X.
    Surface Technology, 2024, 53 (12): : 193 - 206
  • [38] Prediction and Optimization of Surface Roughness in a Turning Process Using the ANFIS-QPSO Method
    Alajmi, Mahdi S.
    Almeshal, Abdullah M.
    MATERIALS, 2020, 13 (13) : 1 - 23
  • [39] The prediction of surface roughness and tool vibration by using metaheuristic-based ANFIS during dry turning of Al alloy (AA6013)
    Mehmet Ali Guvenc
    Hasan Huseyin Bilgic
    Mustafa Cakir
    Selcuk Mistikoglu
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
  • [40] The prediction of surface roughness and tool vibration by using metaheuristic-based ANFIS during dry turning of Al alloy (AA6013)
    Guvenc, Mehmet Ali
    Bilgic, Hasan Huseyin
    Cakir, Mustafa
    Mistikoglu, Selcuk
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (10)