On-orbit geometric calibration of MERSI whiskbroom scanner

The whiskbroom scanner is a critical component in remote sensing payloads, such as the Visible Infrared Imaging Radiometer Suite (VIIRS) on the Joint Polar Satellite System (JPSS) and the Medium Resolution Spectral Imager (MERSI) on FengYun-3. However, panoramic distortion in whiskbroom scanner images increases overlap from the nadir to the edges between adjacent scans. These distortions present significant challenges for improving geolocation accuracy, particularly when errors occur in sensors and platforms. This manuscript derives analytic expressions for all potential error sources, including sensors, platforms, and elevation, using homogeneous coordinates in the focal plane. This derivation demonstrates that geolocation errors vary with view angles and detector positions. To further investigate these error properties, a gradient-aware least-squares matching method was developed to extract highly accurate and dense ground control points (GCPs) with approximately 100,000 points in a single scene. A three-step geometric calibration method was then introduced, which includes boresight misalignment correction, parametric geometric calibration, and non-uniform scanning compensation. Given the varying spatial resolution of the GCPs, the weight of the GCPs was dynamically updated for leastsquares estimation. This method effectively demonstrated the complex geolocation errors in MERSI on FY-3D, a system that was not meticulously calibrated in the laboratory. The initial root mean square errors (RMSEs) were 3.354 and 12.441 instantaneous field of view (IFoV) for the designed parameters. The proposed geometric calibration method successfully corrected view-angle and detector position-related geolocation errors, reducing them to 0.211 and 0.225 IFoV in the scan and track directions, respectively. The geolocation validation software and experiment results were provided https://github.com/hongbop/whiskgeovalidation.git.