Hot Deformation Behavior of Electron-Beam Cold-Hearth Melted Ti-6Al-4V Alloy

被引:0
|
作者
Jia, Weiju [1 ]
Mao, Chengliang [1 ]
Zhou, Wei [1 ]
机构
[1] Northwest Inst Nonferrous Met Res, Xian 710016, Peoples R China
关键词
titanium alloy; electron-beam cold-hearth melting (EBCHM); hot deformation; microstructures; TITANIUM-ALLOY; CRYSTALLOGRAPHIC ORIENTATION; VARIANT SELECTION; SINGLE-PHASE; TI-17; ALLOY; WORKING; ALPHA; GLOBULARIZATION; KINETICS; RECRYSTALLIZATION;
D O I
10.3390/met14121459
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The deformation behavior and microstructure changes of electron-beam cold-hearth-melted (EBCHM) Ti-6Al-4V alloy were investigated. The stress-strain curves of the alloy were obtained, the constitutive model was established based on the Arrhenius equation, and the hot processing map was drawn. The results showed that the stress of the alloy decreases with increasing temperature and decreasing strain rate. In the beta phase field, there are more recrystallized grains when the strain rate is slow, and the recrystallization of the beta phase does not have enough time to occur when the strain rate is fast. There are obvious shear bands in the microstructure at the strain rate of 10 s-1. In the alpha + beta field, the morphology and crystallographic orientation of the microstructure changed simultaneously. Globularization is a typical microstructure evolution characteristic. The prismatic slip is easier to activate than basal and pyramidal slips. Moreover, globularization of the lamellar alpha phase is not synchronously crystallographic and morphological.
引用
收藏
页数:16
相关论文
共 50 条
  • [31] Effect of electropulsing on deformation behavior of Ti-6Al-4V alloy during cold drawing
    Zhou, Yan
    Chen, Guo-qing
    Fu, Xue-song
    Zhou, Wen-long
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (04) : 1012 - 1021
  • [32] Influence of Ti-6Al-4V Samples Structure Obtained by the Electron-Beam Manufacturing Method on the Deformation Behavior at Tension
    Gusarova, A. V.
    Khoroshko, E. S.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167
  • [33] A study on the hot corrosion behavior of Ti-6Al-4V alloy
    Anuwar, Mahesh
    Jayaganthan, R.
    Tewari, V. K.
    Arivazhagan, N.
    MATERIALS LETTERS, 2007, 61 (07) : 1483 - 1488
  • [34] Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy
    Prisco, U.
    Astarita, A.
    El Hassanin, A.
    Franchitti, S.
    MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (15) : 1753 - 1760
  • [35] Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline
    Bai, Yun
    Gai, Xin
    Li, Shujun
    Zhang, Lai-Chang
    Liu, Yujing
    Hao, Yulin
    Zhang, Xing
    Yang, Rui
    Gao, Yongbo
    CORROSION SCIENCE, 2017, 123 : 289 - 296
  • [36] Fatigue testing of electron beam-melted Ti-6Al-4V ELI alloy for dental implants
    Joshi, Gaurav V.
    Duan, Yuanyuan
    Neidigh, John
    Koike, Mari
    Chahine, Gilbert
    Kovacevic, Radovan
    Okabe, Toru
    Griggs, Jason A.
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2013, 101B (01) : 124 - 130
  • [37] Influence of melt parameters on the microstructure of electron beam melted Ti-6Al-4V
    Davies, G. R.
    Lancaster, R. J.
    Thomas, M.
    Todd, I.
    Stapleton, D.
    Baxter, G. J.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 : 3038 - 3046
  • [38] Process driven strengthening mechanisms in electron beam melted Ti-6Al-4V
    Everhart, Wes
    Dinardo, Joseph
    ADDITIVE MANUFACTURING, 2018, 24 : 440 - 445
  • [39] Effect of hot deformation on the tribological behaviour of Ti-6Al-4V alloy
    Ismail, A.
    Abdel-Aziz, M.
    El-Morsy, A.
    El-Bitar, T.
    CANADIAN METALLURGICAL QUARTERLY, 2006, 45 (04) : 469 - 473
  • [40] HOT-DEFORMATION BEHAVIOR OF HOT ISOSTATIC PRESSED Ti-6Al-4V ALLOY DURING HOT COMPRESSION
    Liu, Haijun
    Zhang, Zhimin
    Xu, Kaihua
    Zhang, Jishi
    Xue, Yong
    Wang, Qiang
    MATERIALI IN TEHNOLOGIJE, 2021, 55 (04): : 559 - 570