Comparison of Ni-based SiC and B4C reinforcements on a TIG-coated AISI 1040 steel

被引：0
|
作者：
Bulut, Fadile [1 ]
Imak, Anil [1 ]
Kirik, Ihsan [1 ]
机构：
[1] Bingol Univ, Dept Mech Engn, Bingol 12000, Turkiye
来源：
MATERIALS TESTING | 2025年 / 67卷 / 01期
关键词：
powder metallurgy; TIG welding; coating; microstructure; wear; MECHANICAL-PROPERTIES; WEAR-RESISTANCE; MICROSTRUCTURE; COATINGS; BEHAVIOR; SURFACE; CU;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In order to coat the surface of AISI 1040 steel using the TIG coating process, SiC and B4C are added to NiCrBAl powder at various rates. The microstructure and wear characteristics are then analyzed. Thus, it is intended to increase the AISI 1040 steel's resistance to elements like abrasion and friction while lowering maintenance expenses. The ratio of B4C to SiC reinforcing powder affected the produced coating layer's microstructure analyses and wear tests were carried out. Therefore, it has been found that the hard carbide phases and boron carbides generated in the coating layer have a favorable impact on wear, lowering weight losses and friction coefficients.
引用
收藏
页码：49 / 60
页数：12
相关论文
共 50 条
  • [31] B4C/Ni Composite Coatings Prepared by Cold Spray of Blended or CVD-Coated Powders
    Feng, C.
    Guipont, V.
    Jeandin, M.
    Amsellem, O.
    Pauchet, F.
    Saenger, R.
    Bucher, S.
    Iacob, C.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (3-4) : 561 - 570
  • [32] Processing, microstructure and mechanical properties of HfB2-ZrB2-SiC composites: Effect of B4C and carbon nanotube reinforcements
    Nisar, Ambreen
    Khan, Mohammad Mohsin
    Bajpai, Shipra
    Balani, Kantesh
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 81 : 111 - 118
  • [33] Wear Properties of Fe-Cr-C and B4C Powder Coating on AISI 316 Stainless Steel Analyzed by the Taguchi Method
    Gur, Ali Kaya
    Ozay, Cetin
    Orhan, Ayhan
    Buytoz, Soner
    Caligulu, Ugur
    Yigitturk, Necmettin
    MATERIALS TESTING, 2014, 56 (05) : 393 - 398
  • [34] Effect of B4C on the Mechanical Properties and Microstructure of ZrB2-SiC Based Ceramics
    Liu Xuan
    Xu Qiang
    Zhu Shizhen
    CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 218 - 221
  • [35] Effect of B4C on Mechanical Properties and Microstructure of ZrB2-SiC Based Ceramics
    Liu Xuan
    Xu Qiang
    Zhu Shizhen
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 906 - 908
  • [36] Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
    Gunen, Ali
    Karahan, Ismail Hakki
    Karakas, Mustafa Serdar
    Kurt, Bulent
    Kanca, Yusuf
    Cay, Vedat Veli
    Yildiz, Murat
    METALS AND MATERIALS INTERNATIONAL, 2020, 26 (09) : 1329 - 1340
  • [37] Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
    Ali Günen
    İsmail Hakki Karahan
    Mustafa Serdar Karakaş
    Bülent Kurt
    Yusuf Kanca
    Vedat Veli Çay
    Murat Yıldız
    Metals and Materials International, 2020, 26 : 1329 - 1340
  • [38] Adhesion Behaviour, Nanohardness and Surface Roughness of Ti-6Al-4V-6B4C Thin Films Grown on AISI 1040 Steel
    Selvakumar, N.
    Prince, R. Malkiya Rasalin
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (04) : 893 - 899
  • [39] Comparison of the Phase Stability and Corrosion Resistance of the Ni-Based Alloys C-4 and C-276
    H. M. Tawancy
    L. M. Alhems
    Journal of Materials Engineering and Performance, 2019, 28 : 2489 - 2498
  • [40] Comparison of the Phase Stability and Corrosion Resistance of the Ni-Based Alloys C-4 and C-276
    Tawancy, H. M.
    Alhems, L. M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (05) : 2489 - 2498
12345