Influence of tungsten carbide tool wear on resulting joint during friction stir welding of titanium alloys

被引：0
|
作者：
Amirov, A. I. [1 ]
Chumaevskii, A. V. [1 ]
Semenchuk, N. V. [1 ]
Sidorov, E. A. [1 ]
Eliseev, A. A. [1 ]
Savchenko, N. L. [1 ]
机构：
[1] Russian Acad Sci, Siberian Branch, Inst Strength Phys & Mat Sci, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2025年
基金：
俄罗斯科学基金会;
关键词：
Titanium alloy; Tungsten carbide; Friction stir welding; Mechanical strength; Weld structure; 538.951; 620.18; 620.19; MICROSTRUCTURE;
D O I：
10.1007/s11182-024-03336-5
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The effect of tungsten carbide tool wear during friction stir welding of titanium alloys on the resulting weld joints is analyzed. It is shown that the tool geometry changes as a result of the tool wear during welding. A degradation of the joint macrostructure is demonstrated, and a correlation between the joint strength and the tool pass length, expressed as a measure of tool wear, is illustrated.
引用
收藏
页码：1984 / 1991
页数：8
相关论文
共 50 条
  • [31] Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium
    Amlan Kar
    Satyam Suwas
    Satish V. Kailas
    The International Journal of Advanced Manufacturing Technology, 2019, 100 : 435 - 443
  • [32] Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium
    Kar, Amlan
    Suwas, Satyam
    Kailas, Satish V.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (1-4): : 435 - 443
  • [33] Significance of tool offset and copper interlayer during friction stir welding of aluminum to titanium
    Kar, Amlan
    Suwas, Satyam
    Kailas, Satish V.
    International Journal of Advanced Manufacturing Technology, 2019, 100 (1-4): : 435 - 443
  • [34] Friction Stir Welding Of 321 Stainless Steel Plates by Tungsten Lanthanum Tool and Its Joint Analyses
    Johnson, Pradeep
    Murugan, N.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4235 - 4241
  • [35] Estimation of Tool Life and Characteristics of Tool Wear in Friction Stir Spot Welding*
    Akihiko, Ikuta
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2024, 42 (03): : 114 - 122
  • [36] Effect of threads on tool in friction stir welding of aluminum alloys
    Fujii, H
    Cui, L
    Maeda, M
    Sato, YS
    Nogi, K
    ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS, 2006, 512 : 389 - 394
  • [37] Friction and wear mechanisms of tungsten carbide/titanium alloys lubricated with various water-based fluids
    Wu, Xuedong
    Chen, Haigang
    Wang, Dapu
    Yang, Shengrong
    Mocaxue Xuebao/Tribology, 1999, 19 (03): : 218 - 223
  • [38] Friction and Wear Performance of Titanium Alloys against Tungsten Carbide under Dry Sliding and Water Lubrication
    Niu, Q. L.
    Zheng, X. H.
    Ming, W. W.
    Chen, M.
    TRIBOLOGY TRANSACTIONS, 2013, 56 (01) : 101 - 108
  • [39] Metal inclusions in the seams and fracture of the tool during friction stir welding of aluminium alloys
    Feofanov A.N.
    Ovchinnikov V.V.
    Gubin A.M.
    Welding International, 2021, 35 (4-6) : 185 - 191
  • [40] CHARACTERIZATION OF CARBIDE TOOL WEAR AND INFLUENCE OF TITANIUM CARBIDE COATINGS
    PAYNE, DA
    BIND, JM
    HAM, I
    BIGGERS, JV
    MECHANICAL ENGINEERING, 1975, 97 (03) : 66 - 66
12345