Effect of Structural Defects Induced in LaFeO3 and LaMnO3 Catalysts towards Total Oxidation of 2-Propanol

A crucial characteristic of perovskite-like oxides is oxygen mobility, which can be enhanced by inducing structural defects through stoichiometry variations during synthesis, thereby boosting the catalytic activity. This study evaluated the effect of structural modifications of LaFeO3 (LF) and LaMnO3 (LM) perovskites series on the total oxidation of 2-propanol as a VOC model, a well-known organic solvent. These modifications were performed during synthesis by partially removing the B-site cation or by structural doping in the B-site with another cation (Mn for the LF series and Pd for the LM series). Structural characterization was carried out by XRD and Raman spectroscopy, while the bulk and surface chemical composition were assessed by ICP and XPS, respectively. On the other hand, catalytic activity was performed using a reactivity test with the 2-propanol molecule. The CO-TPR and O2-TPD measurements were used to characterize the reducibility of the active phase, and the type of oxygen species present in the sample. The catalytic activity results indicated that the modified perovskites showed a difference of 118 degrees C and 109 degrees C in the T95 parameter (Temperature at which the conversion of 2-propanol was 95%) relative to pure LF and LM perovskites, respectively. It was also observed that the inclusion of cationic species with high oxidation states enhances the catalytic properties of the materials not only for the doped perovskites but also for the impregnated ones used for comparison purposes. This research demonstrated that stoichiometric variations in modified perovskite-like catalysts significantly improve the catalytic capacity by forming structural defects and modifying redox properties.Kindly check and confirm whether the corresponding author is correctly identified.I confirm that the corresponding author is well identified