Non-Destructive Testing of Reinforced Clayey Sand Stabilized with Seashell Ash Using Ultrasonic Pulse Velocity Test

被引:0
|
作者
Zamanpour, Alireza [1 ]
Asakereh, Adel [1 ]
Haddad, Abdolhosein [1 ]
机构
[1] Semnan Univ, Fac Civil Engn, Semnan, Iran
关键词
Seashell ash; PET fibers; CBR; UPV; Clayey sand; LIQUEFACTION; OPTIMIZATION; PIPELINE; CEMENT;
D O I
10.1007/s40515-024-00475-7
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This research uses seashell ash (SAA) and polyethylene terephthalate (PET) fibers to improve clayey sand soil. For this purpose, CBR and ultrasonic pulse velocity (UPV) tests are conducted on sandy soil samples with different clay contents and stabilized with different contents of SSA and PET fibers. Results indicated that the SSA and PET fiber inclusion caused an increase in CBR values, and it was found that the optimal mix design of the treated clayey sand is 30% clay, 7% SSA, and 1% PET fiber, and the optimum curing time was 28 days. The exponential relationship between UPV values (P-wave velocity or VP) and CBR test results showed that CBR could be predicted by UPV with acceptable accuracy.
引用
收藏
页数:14
相关论文
共 50 条
  • [31] Non-Destructive Evaluation of Coating Thickness Using Water Immersion Ultrasonic Testing
    Zhang, Jiannan
    Cho, Younho
    Kim, Jeongnam
    Malikov, Azamatjon Kakhramon Ugli
    Kim, Young H.
    Yi, Jin-Hak
    Li, Weibin
    COATINGS, 2021, 11 (11)
  • [32] Technical staff training in ultrasonic non-destructive testing using virtual reality
    Vergara-Rodriguez, Diego
    Rodriguez-Martin, Manuel
    Rubio-Cavero, Manuel-Pablo
    Ferrer-Marin, Jesus
    Nunez-Garcia, Francisco-Javier
    Moralejo-Cobo, Luisa
    DYNA, 2018, 93 (02): : 150 - 154
  • [33] Surface reconstruction accuracy using ultrasonic arrays: Application to non-destructive testing
    Malkin, Robert E.
    Franklin, Amanda C.
    Bevan, Rhodri L. T.
    Kikura, Hiroshige
    Drinkwater, Bruce W.
    NDT & E INTERNATIONAL, 2018, 96 : 26 - 34
  • [34] Flaw Characterization in Ultrasonic Non-destructive Testing Method Using Exponential Modeling
    Ravanbod, Hossein
    Karimi, Fatemeh
    Amindavar, Hamidreza
    2013 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC), 2013, : 1676 - 1679
  • [35] Non-destructive assessment of carbonation in concrete using the ultrasonic test: Influenced parameters
    Royaei, Javad
    Nouban, Fatemeh
    Sadeghi, Kabir
    STRUCTURAL ENGINEERING AND MECHANICS, 2024, 89 (03) : 301 - 308
  • [36] NON-DESTRUCTIVE TESTING OF FIBER REINFORCED COMPOSITE MATERIALS USING A CAPACITANCE BRIDGE
    Asmatulu, R.
    Venishetty, B.
    Asmatulu, E.
    IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 11, 2010, : 171 - 177
  • [37] Non-destructive Evaluation of Strength Gain of Ordinary Portland Cement Mortar by Ultrasonic Pulse Velocity Method
    De Silva, S. D. C.
    Sivahar, V.
    2ND INTERNATIONAL MERCON 2016 MORATUWA ENGINEERING RESEARCH CONFERENCE, 2016, : 337 - 342
  • [38] Ultrasonic pulse velocity test for non-destructive investigations of historical masonries: an experimental study of the effect of frequency and applied load on the response of a limestone
    Vasanelli, E.
    Calia, A.
    Luprano, V.
    Micelli, F.
    MATERIALS AND STRUCTURES, 2017, 50 (01)
  • [39] STUDY OF DISTANCE AND NUMBER OF REBARS ON VELOCITY MEASUREMENT USING NON-DESTRUCTIVE TEST
    Nainggolan, Christin Remayanti
    Wijatmiko, Indradi
    Suseno, Hendro
    Firdausy, Ananda Insan
    INTERNATIONAL JOURNAL OF GEOMATE, 2022, 22 (94): : 121 - 127
  • [40] Ultrasonic pulse velocity test for non-destructive investigations of historical masonries: an experimental study of the effect of frequency and applied load on the response of a limestone
    E. Vasanelli
    A. Calia
    V. Luprano
    F. Micelli
    Materials and Structures, 2017, 50