DEVELOPMENT OF HIGH DAMPING RUBBER SHEAR WALL FOR MID-RISE WOODEN CONSTRUCTION

被引：0

作者：

Takeuchi, Akihiro ^{[1
]}

Yan, Chongbing ^{[2
]}

Tanaka, Kazuhiro ^{[2
]}

Kanagawa, Motoi ^{[1
]}

机构：

[1] Research Institute of Technology, Nishimatsu Construction Co., LTD., Japan

[2] Hybrid Rubber Products HQS., Sumitomo Rubber Industries LTD., Japan

来源：

AIJ Journal of Technology and Design | 2025年 / 31卷 / 77期

关键词：

Timber - Wooden construction;

D O I：

10.3130/aijt.31.193

中图分类号：

学科分类号：

摘要：

This study proposes a structural system of passive controlled shear wall for mid-rise wooden construction consist of high damping rubber, cross laminated timber and drift-pin joint. In this paper, to verify the effectiveness of proposed shear wall, cyclic loading tests of high damping rubber damper and full scaled shear wall specimens were conducted. As a result, it was confirmed that the proposed shear wall demonstrated its target performance of 150kN horizontal strength. And it was also confirmed that no degradation occurred in proposed shear wall in the range of 1/50rad. © 2025 Architectural Institute of Japan. All rights reserved.

引用

页码：193 / 198

共 50 条

[21] Implications of modeling approaches on seismic performance of low- and mid-rise office and hospital shear wall buildings
Terzic, Vesna
Kolozvari, Kristijan
Saldana, Daniel
ENGINEERING STRUCTURES, 2019, 189 : 129 - 146
[22] Strength and deformation of mid-rise shear walls under load reversal
Tasnimi, AA
ENGINEERING STRUCTURES, 2000, 22 (04) : 311 - 322
[23] Identification of vibration properties of a mid-rise wooden building using subspace identification method
Miyazu, Yuji
Mori, Takuro
14TH INTERNATIONAL CONFERENCE ON VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY (VETOMAC XIV), 2018, 211
[24] Lateral deformations of perforated shear walls for low and mid-rise buildings
Mackertich, S
Aswad, A
PCI JOURNAL, 1997, 42 (01): : 30 - &
[25] Seismic performance evaluation of mid-rise shear walls: experiments and analysis
Parulekar, Y. M.
Reddy, G. R.
Singh, R. K.
Gopalkrishnan, N.
Ramarao, G. V.
STRUCTURAL ENGINEERING AND MECHANICS, 2016, 59 (02) : 291 - 312
[26] Seismic performance of mid-rise RC frame and frame-shear wall buildings designed for Indian codes
Singh, Yogendra (yogendra.eq@gmail.com), 1600, Structural Engineering Research Centre (43):
[27] Study on seismic performance of mid-rise RC shear wall with single row of steel bars and simplified boundary elements
Beijing Key Laboratory of Earthquake Engineering and Structural Retrofit, Beijing University of Technology, Beijing 100124, China
Tumu Gongcheng Xuebao, 2009, 12 (99-104):
[28] A semi-active mass damping system for low- and mid-rise buildings
Lin, Pei-Yang
Lin, Tzu-Kang
Hwang, Jenn-Shin
EARTHQUAKES AND STRUCTURES, 2013, 4 (01) : 63 - 84
[29] Mid-Rise Wood Frame Construction: A Good Idea or Are We Asking for Trouble?
Hodgin, Derek A.
FORENSIC ENGINEERING 2018: FORGING FORENSIC FRONTIERS, 2018, : 62 - 72
[30] Causes and mitigation for declining productivity in the Australian mid-rise residential construction sector
Bohme, Tillmann
Escribano, Alberto
Heffernan, Emma Elizabeth
Beazley, Scott
BUILT ENVIRONMENT PROJECT AND ASSET MANAGEMENT, 2018, 8 (03) : 253 - 266

← 1 2 3 4 5 →