Effect of Chemical Composition and Lamellar Structure Parameters on the Mechanical Properties of VT6 Titanium Alloy Rods

被引：0

作者：

Yu. B. Egorova ^{[1
]}

L. V. Davydenko ^{[2
]}

机构：

[1] Moscow Aviation Institute (National Research University),

[2] Moscow Polytechnic University,undefined

来源：

Russian Metallurgy (Metally) | 2024年 / 2024卷 / 6期

关键词：

: VT6 titanium alloy; aluminum and molybdenum equivalents; mechanical properties; lamellar structure; statistical studies; prediction of properties;

D O I：

10.1134/S0036029524702434

中图分类号：

学科分类号：

摘要：

Abstract—The results of experimental and statistical studies of the dependence of the mechanical properties of VT6 alloy rolled rods 20–155 mm in diameter on the chemical composition and lamellar structure parameters after various types of annealing are presented. Models to predict the ultimate tensile strength as a function of the α-phase lamella thickness and the structural aluminum and molybdenum equivalents are proposed. A strength diagram is constructed in the coordinates aluminum equivalent–α-lamella thickness–ultimate tensile strength at various molybdenum equivalents. The equivalents and structural parameters that provide the fulfillment of the requirements of industry standards are justified.

引用

页码：1346 / 1351

页数：5

共 50 条

[21] Microstructure and Mechanical Properties of Titanium Alloy VT6 and VT20L Diffusion Joints
Travyanov, A. Ya.
Petrovsky, P. V.
Cheverikin, V. V.
Lagutin, A. O.
Khomutov, M. G.
Luk'yanov, V. V.
METALLURGIST, 2022, 65 (9-10) : 1133 - 1141
[22] Physico-mechanical properties of VT6 titanium alloy after combined treatment
Luk'yanenko, E., V
Kurbatova, I. A.
Yakutina, S., V
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE) 2020, 2020, 971
[23] EFFECT OF LAMELLAR STRUCTURE PARAMETERS ON THE PROPERTIES OF TITANIUM-ALLOY VT3-1
BRUN, MY
SHAKHANOVA, GV
SOLDATENKO, IV
METAL SCIENCE AND HEAT TREATMENT, 1986, 28 (7-8) : 519 - 522
[24] Mechanical Properties and Structure of VT6 alloy Samples Obtained by EBAM Method
Gusarova, A. V.
Khoroshko, E. S.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167
[25] Influence of the parameters of nitriding on the subsurface hardening of VT6 titanium alloy
Pohrelyuk, I. M.
Fedirko, V. M.
Kravchyshyn, T. M.
MATERIALS SCIENCE, 2007, 43 (06) : 807 - 813
[26] Effect of the initial hydrogen concentration and vacuum-annealing modes on the structure, phase composition, and mechanical properties of sheet billets of the VT6 alloy: Part 2. Effect of the phase composition and grain size on mechanical properties of sheet billets of the VT6 alloy
V. K. Nosov
P. A. Nesterov
Yu. Yu. Shchugorev
O. A. Polyakov
N. A. Grachev
Russian Journal of Non-Ferrous Metals, 2012, 53 : 465 - 470
[27] Influence of the parameters of nitriding on the subsurface hardening of VT6 titanium alloy
I. M. Pohrelyuk
V. M. Fedirko
T. M. Kravchyshyn
Materials Science, 2007, 43 : 807 - 813
[28] Effect of the initial hydrogen concentration and vacuum-annealing modes on the structure, phase composition, and mechanical properties of sheet billets of the VT6 alloy: Part 2. Effect of the phase composition and grain size on mechanical properties of sheet billets of the VT6 alloy
Nosov, V. K.
Nesterov, P. A.
Shchugorev, Yu. Yu.
Polyakov, O. A.
Grachev, N. A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2012, 53 (06) : 465 - 470
[29] Improvement in the mechanical properties of titanium alloy VT6 by forming bimodal submicro-micro grain structure
Safin, E. V.
Malysheva, S. P.
Galyev, R. M.
LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2015, 5 (01): : 94 - 96
[30] Morphology and Corrosion Properties of Hydroxyapatite Coating on VT6 Titanium Alloy
I. M. Pohrelyuk
O. V. Tkachuk
R. V. Proskurnyak
O. V. Kuznetsov
Ya. M. Gnilitskyi
Materials Science, 2023, 58 : 781 - 787

← 1 2 3 4 5 →