Effect of Chemical Composition and Lamellar Structure Parameters on the Mechanical Properties of VT6 Titanium Alloy Rods

被引：0
|
作者：
Yu. B. Egorova [1 ]
L. V. Davydenko [2 ]
机构：
[1] Moscow Aviation Institute (National Research University),
[2] Moscow Polytechnic University,undefined
来源：
Russian Metallurgy (Metally) | 2024年 / 2024卷 / 6期
关键词：
: VT6 titanium alloy; aluminum and molybdenum equivalents; mechanical properties; lamellar structure; statistical studies; prediction of properties;
D O I：
10.1134/S0036029524702434
中图分类号：
学科分类号：
摘要：
Abstract—The results of experimental and statistical studies of the dependence of the mechanical properties of VT6 alloy rolled rods 20–155 mm in diameter on the chemical composition and lamellar structure parameters after various types of annealing are presented. Models to predict the ultimate tensile strength as a function of the α-phase lamella thickness and the structural aluminum and molybdenum equivalents are proposed. A strength diagram is constructed in the coordinates aluminum equivalent–α-lamella thickness–ultimate tensile strength at various molybdenum equivalents. The equivalents and structural parameters that provide the fulfillment of the requirements of industry standards are justified.
引用
收藏
页码：1346 / 1351
页数：5
相关论文
共 50 条
  • [1] Effect of Structure on Mechanical Properties of Welded Joints of the VT6 Titanium Alloy.
    Gridnev, V.N.
    Zamkov, V.N.
    Kushnareva, N.P.
    Trefilov, V.I.
    Turtsevich, E.N.
    Shevelev, A.D.
    Izvestia Akademii nauk SSSR. Metally, 1981, (03): : 171 - 184
  • [2] Influence of heat treatment parameters on the structure and mechanical properties of a titanium VT6 alloy in the submicrocrystalline state
    Ratochka I.V.
    Lykova O.N.
    Inorganic Materials: Applied Research, 2017, 8 (2) : 348 - 352
  • [3] Statistical investigation of mechanical properties of VT6 alloy bars with globular-lamellar structure
    Egorova, Yu. B.
    Skvortsova, S. V.
    Davydenko, L. V.
    Gvozdeva, O. N.
    METALLURGIST, 2024, 68 (01) : 83 - 90
  • [4] Effect of initial structure on the mechanical properties of specimens of titanium alloy VT6 joined in the superplastic state
    Lutfullin, R. Ya.
    Mukhametrakhimov, M. Kh.
    METAL SCIENCE AND HEAT TREATMENT, 2006, 48 (1-2) : 54 - 56
  • [5] Forecasting Mechanical Properties of Forgings of VT6 and VT3-1 Titanium Alloys Depending on the Chemical Composition and Structure
    Yu. B. Egorova
    L. V. Davydenko
    S. B. Belova
    E. V. Chibisova
    Russian Journal of Non-Ferrous Metals, 2018, 59 : 148 - 156
  • [6] Forecasting Mechanical Properties of Forgings of VT6 and VT3-1 Titanium Alloys Depending on the Chemical Composition and Structure
    Egorova, Yu. B.
    Davydenko, L. V.
    Belova, S. B.
    Chibisova, E. V.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2018, 59 (02) : 148 - 156
  • [7] Effect of initial structure on the mechanical properties of specimens of titanium alloy VT6 joined in the superplastic state
    R. Ya. Lutfullin
    M. Kh. Mukhametrakhimov
    Metal Science and Heat Treatment, 2006, 48 : 54 - 56
  • [8] The effect of structure on mechanical behavior of VT6 titanium alloy under shock loading
    Sarkeeva, A. A.
    Lutfullin, R. Ya.
    Kruglov, A. A.
    Astanin, V. V.
    LETTERS ON MATERIALS, 2012, 2 (02): : 99 - 102
  • [9] Mechanical properties of VT6 titanium alloy with microcrystalline and submicrocrystalline structures
    Salishchev, GA
    Galeev, RM
    Zherebtsov, SV
    Smyslov, AM
    Safin, EV
    Myshlyaev, MM
    RUSSIAN METALLURGY, 1999, (06): : 99 - 103
  • [10] Forecasting VT6 Titanium Alloy Rolled Bar Mechanical Properties
    Egorova, Yu B.
    Skvortsova, S., V
    Davydenko, L., V
    METALLURGIST, 2020, 64 (3-4) : 242 - 252
12345