Structure and Mechanical Performance of 03Kh17N10M2 Steel Alloyed with Silver

被引：0

作者：

Kaplan, M.A. ^{[1
]}

Gorbenko, A.D. ^{[1
,2
]}

Ivannikov, A. Yu. ^{[1
]}

Mikhailova, A.V. ^{[1
]}

Konushkin, S.V. ^{[1
]}

Baikin, A.S. ^{[1
]}

Sergienko, K.V. ^{[1
]}

Morozova, Ya. A. ^{[1
,2
]}

Nasakina, E.O. ^{[1
]}

Kolmakov, A.G. ^{[1
]}

Sevostyanov, M.A. ^{[1
,2
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow,119934, Russia

[2] All-Russian Research Institute of Phytopathology, Moscow oblast, Bolshie Vyazemy,143050, Russia

来源：

Russian Metallurgy (Metally) | 2024年 / 2024卷 / 02期

关键词：

Manganese alloys - Remelting - Silver metallurgy;

D O I：

10.1134/S003602952470068X

中图分类号：

学科分类号：

摘要：

Abstract: The influence of silver additives in an amount of 0.2 and 0.5 wt % on the structure and mechanical properties of 03Kh17N10M2 steel sheets 1 μm thick has been studied. The steel has been obtained by means of argon arc remelting followed by homogenization annealing and hot longitudinal rolling. It has been found that when the silver content rises from 0 to 0.5 wt %, the strength parameters of the steel somewhat decline: σ0.2 and σr drop from 560 to 510 MPa and from 760 to 710 MPa, respectively, and the microhardness decreases from 274 to 250 HV. However, these values remain within the ASTM A240 requirements. In both cases, the fracture surface represents an ensemble of self-similar tough fracture pores (cups). The new type of steel (with a silver content of up to 0.5 wt %) may be efficient in the production of products with pronounced antibacterial properties. © Pleiades Publishing, Ltd. 2024.

引用

页码：374 / 378

页数：4

共 50 条

[31] DUCTILITY OF 03KH11N10M2T STEEL AT TEMPERATURES BETWEEN 20 AND 1100-DEGREES-C
VEKSLER, YG
ZVIGINTSEV, NV
KONAKOVA, IP
BELALOVA, GV
SUNTSOV, GN
STEEL IN THE USSR, 1986, 16 (08): : 393 - 395
[32] EFFECT OF THE SIGMA PHASE ON THE CORROSION-RESISTANCE OF ALLOYS 06KHN28MDT AND 03KH28MDT AND STEELS 03KH21N21M4B AND 10KH17N13M2T
SIDORKINA, YS
KHAKHLOVA, NV
SNETKOV, AY
SERGEEVA, GV
LARIONOVA, RF
AKSHENTSEVA, AP
PROTECTION OF METALS, 1980, 16 (05): : 476 - 480
[33] ACCELERATED POTENTIOKINETIC DETERMINATION OF LIABILITY OF 10KH17N13M2T STEEL TO INTERCRYSTALLITE CORROSION
YUDINA, SM
MARKOVA, ON
UGLOVA, AM
PROTECTION OF METALS, 1981, 17 (03): : 312 - 314
[34] Effect of microadditions of boron, yttrium and calcium on cast structure of 03Kh20N18M3D2 steel
Kobulashvili, G.Sh.
Okrostsvaridze, Z.Sh.
Tavadze, L.F.
Batsikadze, T.A.
Litejnoe Proizvodstvo, 2001, (07): : 9 - 12
[35] STRUCTURE, COMPOSITION OF INTERMETALLIC PHASES AND PROPERTIES OF 00KH11N10M2T STEEL
TARASENKO, LV
ZVIGINTSEV, NV
TITOV, VI
RULINA, ZM
KHADYYEV, MS
FIZIKA METALLOV I METALLOVEDENIE, 1985, 59 (03): : 551 - 558
[36] Structure and mechanical properties of the 03Kh14GNF steel after deformation and annealing
D. V. Shaburov
V. G. Valitov
D. A. Mirzaev
I. L. Yakovleva
M. S. Kirpichnikov
T. Yu. Vetoshkina
The Physics of Metals and Metallography, 2009, 107 : 400 - 408
[37] STRUCTURE AND COMPOSITION OF INTERMETALLIC PHASES AND PROPERTIES OF STEEL 00Kh11N10M2T.
Tarasenko, L.V.
Zvigintsev, N.V.
Titov, V.I.
Rulina, Z.M.
Khadyev, M.S.
Physics of Metals and Metallography, 1985, 59 (03): : 124 - 131
[38] Effect of Shear Deformation at High Pressure on Austenitic-Ferritic Steel 03Kh13N10K5M2Yu2T Structure and Properties
A. V. Levina
L. A. Mal’tseva
A. A. Arkhangel’skaya
Yu. N. Loginov
N. N. Ozerets
T. V. Mal’tseva
Metal Science and Heat Treatment, 2015, 57 : 320 - 328
[39] Structure and mechanical properties of the 03Kh14GNF steel after deformation and annealing
Shaburov, D. V.
Valitov, V. G.
Mirzaev, D. A.
Yakovleva, I. L.
Kirpichnikov, M. S.
Vetoshkina, T. Yu.
PHYSICS OF METALS AND METALLOGRAPHY, 2009, 107 (04): : 400 - 408
[40] CRACKING RESISTANCE OF BUTT WELDED JOINTS IN 03Kh11N10M2T MARAGING STEEL IN STATIC LOADING.
Kurkin, S.A.
1985, (32):

← 1 2 3 4 5 →