The Influence of the Elemental Composition on the Mechanical and Tribological Properties of TiAlN Coatings

被引：0
|
作者：
Kraynova, E. O. [1 ]
Grenadyorov, A. S. [1 ]
Semenov, V. A. [1 ]
Solovyev, A. A. [1 ]
机构：
[1] RAS, Inst High Current Elect, SB, Tomsk, Russia
来源：
HIGH ENERGY CHEMISTRY | 2024年 / 58卷 / SUPPL3期
关键词：
TiAlN; HiPIMS; hardness; wear resistance;
D O I：
10.1134/S0018143924701145
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
This work investigates the dependence of the mechanical and tribological properties of TiAlN coatings on the Al/Ti ratio. The coatings were obtained by dual high power impulse magnetron sputtering of metallic Ti and Al targets. It is shown that the hardness of TiAlN coatings with an Al/Ti ratio ranging from 0.04 to 0.77 is 30 +/- 1 GPa. As the Al content increases, the modulus of elasticity decreases from 400 to 330 GPa, while the resistance to plastic deformation H-3/E-2 and the plasticity index H/E increase (from 0.19 to 0.28 GPa and from 0.08 to 0.09, respectively). The best wear resistance of the coating (wear rate of 8.4 x 10(-8) mm(3) N-1 m(-1)) is observed for the coating with an Al/Ti ratio equal to 0.58.
引用
收藏
页码：S344 / S348
页数：5
相关论文
共 50 条
  • [21] Effect of the modulation geometry on mechanical and tribological properties of TiSiN/TiAlN nano-multilayer coatings
    Chen, Ziliang
    Lou, Ming
    Geng, Dongsen
    Xu, Yu X.
    Wang, Qimin
    Zheng, Jun
    Zhu, Ruiyuan
    Chen, Yubo
    Kim, Kwang Ho
    SURFACE & COATINGS TECHNOLOGY, 2021, 423
  • [22] Influence of the Chemical Composition of AlCrN Coatings on Their Mechanical, Tribological, and Corrosion Characteristics
    Gilewicz, A.
    Dobruchowska, E.
    Murzynski, D.
    Kuznetsova, T. A.
    Lapitskaya, V. A.
    Myslinski, P.
    Warcholinski, B.
    JOURNAL OF FRICTION AND WEAR, 2020, 41 (05) : 383 - 392
  • [23] Influence of the Chemical Composition of AlCrN Coatings on Their Mechanical, Tribological, and Corrosion Characteristics
    A. Gilewicz
    E. Dobruchowska
    D. Murzynski
    T. A. Kuznetsova
    V. A. Lapitskaya
    P. Myslinski
    B. Warcholinski
    Journal of Friction and Wear, 2020, 41 : 383 - 392
  • [24] Influence of a reverse positive HiPIMS pulse on the microstructure and mechanical properties of the TiAlN coatings
    Cai, Qun
    Bai, Xuebing
    Zeng, Yuqiao
    Zhang, Xuhai
    VACUUM, 2025, 234
  • [25] Influence of vanadium on structure, mechanical and tribological properties of CrN coatings
    Aissani, L.
    Nouveau, C.
    Walock, M. J.
    Djebaili, H.
    Djelloul, A.
    SURFACE ENGINEERING, 2015, 31 (10) : 779 - 788
  • [26] CHARACTERIZATION OF COMPOSITE TRIBOLOGICAL COATINGS - COMPOSITION, MICROSTRUCTURE AND MECHANICAL-PROPERTIES
    LIU, GH
    GRAS, R
    BLOUET, J
    SURFACE & COATINGS TECHNOLOGY, 1993, 58 (03): : 199 - 203
  • [27] Influence of Deposition Temperature on Microstructure and Mechanical Properties of TiAlN Coatings for High Performance Manufacture
    Liu, Xinglong
    Xu, Chengyuan
    Chen, Bin
    Qiao, Hong
    Lin, Zeng
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2023, 52 (06): : 2024 - 2030
  • [28] Influence of Deposition Temperature on Microstructure and Mechanical Properties of TiAlN Coatings for High Performance Manufacture
    Liu Xingiong
    Xu Chengyuan
    Chen Bin
    Qiao Hong
    Lin Zeng
    RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (06) : 2024 - 2030
  • [29] The influence of changes in the composition of substrate on the mechanical properties of coatings
    Ilina, A. S.
    Parfenova, E. S.
    Goncharenko, I. M.
    Goncharenko, I. M.
    2015 INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS (MEACS), 2015,
  • [30] Influence of bi-layer period thickness on the residual stress, mechanical and tribological properties of nanolayered TiAlN/CrN multi-layer coatings
    Chang, Chi-Lung
    Jao, Jui-Yun
    Ho, Wei-Yu
    Wang, Da-Yung
    VACUUM, 2007, 81 (05) : 604 - 609
12345