Simulation of Unsteady Flow Characteristics of a Vehicle Turbocharger Compressor Based on Internal Joint Operating Law

被引:0
|
作者
Huang, Rong [1 ]
Ni, Jimin [1 ]
Fan, Houchuan [1 ]
Shi, Xiuyong [1 ]
Wang, Qiwei [1 ]
Yin, Qi [2 ]
机构
[1] School of Automotive Studies, Tongji University, Shanghai,201804, China
[2] General Institute of Innovation Research and Development, SAIC Motor, Shanghai,201804, China
来源
Tongji Daxue Xuebao/Journal of Tongji University | 2024年 / 52卷 / 09期
关键词
Superchargers - Turbomachine blades;
D O I
10.11908/j.issn.0253-374x.22465
中图分类号
学科分类号
摘要
In order to improve the matching accuracy between the compressor and the turbocharger under the unsteady flow condition,the internal joint operation law method was proposed based on the turbocharger operating conditions, and the unsteady flow characteristics of the compressor with different structures and performance correction were studied. The results shows that among the three structures of compressors, except for the high speed and high flow rate joint point operation condition,the unsteady flow performance of the equal-length blade compressor with a 1 mm reduction in inlet diameter has obvious advantages and a better surge performance. After the correction of compressor performance based on the unsteady coefficient, the performance of the compressor was closer to the real working condition. © 2024 Science Press. All rights reserved.
引用
收藏
页码:1448 / 1455
相关论文
共 50 条
  • [21] OFF-DESIGN ANALYSIS AND FLOW CONTROL OF CENTRIFUGAL COMPRESSOR FOR VEHICLE ENGINE TURBOCHARGER
    Wang Chenfang
    Zhang, Yangjun
    Zheng, Xinqian
    Chen, Jinke
    Wang Zengquan
    Xing Weidong
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 2D, 2014,
  • [22] Investigation of unsteady characteristics in a counter-rotating compressor based on unsteady numerical simulation and mode decomposition methods
    Wang, Lei
    Mao, Xiaochen
    Ma, Guanzhong
    Liu, Yawei
    Gao, Limin
    AEROSPACE SCIENCE AND TECHNOLOGY, 2025, 158
  • [23] UNSTEADY FLOW SIMULATION IN SUCTION MUFFLER OF A HERMETIC RECIPROCATING COMPRESSOR
    Coskun, Umut Can
    Gunes, Hasan
    Sarioglu, Kemal
    Kerpicci, Husnu
    PROCEEDINGS OF THE ASME 12TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2014, VOL 2, 2014,
  • [24] A loosely coupled unsteady flow simulation of a single stage compressor
    Ho, YH
    Lakshminarayana, B
    INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS, 1998, 10 (01) : 73 - 89
  • [25] Study on Correction Method of Internal Joint Operation Curve Based on Unsteady Flow
    Yin, Sheng
    Ni, Jimin
    Fan, Houchuan
    Shi, Xiuyong
    Huang, Rong
    APPLIED SCIENCES-BASEL, 2022, 12 (23):
  • [26] UNSTEADY CFD SIMULATION FOR HIGH SPEED CENTRIFUGAL COMPRESSOR OPERATING NEAR SURGE
    Shahin, Ibrahim
    Gadala, Mohamed
    Alqaradawi, Mohamed
    Badr, Osama
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 2D, 2014,
  • [27] The noise analysis of turbocharger compressor flow filed which based on the Fluent
    Jiang, Guohe
    Chen, Xiang
    ADVANCED COMPOSITE MATERIALS, PTS 1-3, 2012, 482-484 : 1398 - 1401
  • [28] UNSTEADY FLOW IN A TURBOCHARGER CENTRIFUGAL COMPRESSOR: 3D-CFD SIMULATION, IMPELLER BLADE VIBRATION AND VANED DIFFUSER-VOLUTE INTERACTION
    Dickmann, Hans-Peter
    Wimmel, Thomas Secall
    Szwedowicz, Jaroslaw
    Kuehnel, Janpeter
    Essig, Uwe
    PROCEEDINGS OF ASME TURBO EXPO 2009, VOL 7, PTS A AND B, 2009, : 1471 - 1485
  • [29] Experimental investigation on vehicular turbocharger turbine characteristics under unsteady flow condition
    Yu, Li-Guo
    Ma, Chao-Chen
    Shi, Xin
    Zhang, Zhi-Qiang
    Zhang, Qiang
    Zhu, Zhi-Fu
    Zhao, Jia
    Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2010, 31 (05): : 36 - 40
  • [30] Unsteady flow in a turbocharger centrifugal compressor: Three-dimensional computational fluid dynamics simulation and numerical and experimental analysis of impeller blade vibration
    Dickmann, HP
    Wimmel, TS
    Szwedowicz, J
    Filsinger, D
    Roduner, CH
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2006, 128 (03): : 455 - 465