The Influencing Factors of Tangential Dressing of Bronze-bond Diamond Grinding Wheel by Picosecond Pulsed Laser

被引：0
|
作者：
Hao M. [1 ,2 ]
Yao P. [1 ,2 ,3 ]
Zhou J. [1 ,2 ]
Li Y. [4 ]
Liang S. [4 ]
Chu D. [1 ,2 ]
Huang C. [5 ]
机构：
[1] Center for Advanced Jet Engineering Technologies (CaJET), School of Mechanical Engineering, Shandong University, Jinan
[2] Key Laboratory of High Efficiency and Clean Mechanical Manufacture of the Ministry of Education, Jinan
[3] Shenzhen Research Institute of Shandong University, Shenzhen
[4] Beijing Institute of Control Engineering, Beijing
[5] School of Mechanical Engineering, Yanshan University, Qinhuangdao
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
bronze-bonded diamond grinding wheel; grinding wheel dressing; precision grinding; ultrafast laser;
D O I：
10.3901/JME.2024.09.229
中图分类号：
学科分类号：
摘要：
Bronze-bonded diamond grinding wheel is widely used in the grinding of hard and brittle materials because of its excellent grinding performance and strong wear resistance. In order to improve the grinding performance, this study proposes a picosecond laser dressing study of the bronze-bonded diamond grinding wheel, and laser tangential profiling of the coarse-grained (100 #) bronze-bonded diamond grinding wheel. The power density threshold of laser removing bronze binder and diamond with pulse width of 10 ps is obtained by theoretical calculation. The influences of laser power density, laser scanning speed，grinding wheel speed and offset distance on laser dressing quality are studied, the dressing results of the grinding wheel is evaluated by the surface roughness, relief angle of abrasive grain and the protrusion height of the abrasive grain after dressing. The results show that when the laser power density I40W=2.60×1011 W/cm2, laser scanning speed v=360 mm/min, grinding wheel speed n=9 000 r/min, laser offset distance a=0.5 mm, the diamond grinding wheel surface with higher contour accuracy and better abrasive morphology are obtained. The ultrafast pulsed laser used in this study has extremely high peak power and extremely short pulse width. It can process almost any material, and has the unique advantages of small thermal effect and high machining accuracy. It is expected to achieve higher precision grinding wheel dressing. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：229 / 240
页数：11
相关论文
共 33 条
  • [11] ZHANG Z, YAO P, ZHANG Z., A novel technique for dressing metal-bonded diamond grinding wheel with abrasive waterjet and touch truing[J], The International Journal of Advanced Manufacturing Technology, 93, pp. 3063-3073, (2017)
  • [12] CHEN G, DENG H, ZHOU X, Et al., Online tangential laser profiling of coarse-grained bronze-bonded diamond wheels[J], The International Journal of Advanced Manufacturing Technology, 79, pp. 1477-1482, (2015)
  • [13] YAO Z, ZHANG L., Research on GC cup truing technology of super-hard grinding wheel[J], Key Engineering Materials, 764, pp. 408-415, (2018)
  • [14] GUO B, WU M, ZHAO Q, Et al., Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces[J], Ceramics International, 44, 14, pp. 17333-17339, (2018)
  • [15] DENG Hui, CHEN Genyu, ZHOU Cong, Et al., Present situation and prospect of laser dressing technology for superhard abrasive wheels[J], High power laser and particle beams, 26, 7, (2014)
  • [16] CHEN Genyu, DENG Hui, LI Zonggen, Et al., Dressing bronze diamond grinding wheel with pulsed fiber laser[J], China Laser, 40, 7, (2013)
  • [17] CHEN Genyu, LI Lijun, MA Honglu, Et al., Acousto-optic Q-switched YAG pulsed laser sharpening and reshaping bronze diamond grinding wheel[J], Journal of Mechanical Engineering, 41, 4, pp. 175-179, (2005)
  • [18] GUO B, ZHAO Q, YU X., Surface micro-structuring of coarse-grained diamond wheels by nanosecond pulsed laser for improving grinding performance[J], International Journal of Precision Engineering and Manufacturing, 15, 10, pp. 2025-2030, (2014)
  • [19] YUNG K, CHEN G, LI L., The laser dressing of resin-bonded CBN wheels by a Q-switched Nd：YAG laser[J], The International Journal of Advanced Manufacturing Technology, 22, 7, pp. 541-546, (2003)
  • [20] JACKSON M, ROBINSON G, DAHOTRE N，, Et al., Laser dressing of vitrified aluminium oxide grinding wheels[J], British Ceramic Transactions, 102, 6, pp. 237-245, (2003)
1234