Driving Cycle Construction and Gear-shifting Analysis of AMT Semi-trailer Tractor

被引：0

作者：

Li, Bin ^{[1
]}

Liu, Hong-Li ^{[1
]}

Song, Rui ^{[1
]}

Ruan, Jia-Geng ^{[2
]}

机构：

[1] School of Automobile, Chang'an University, Shaanxi, Xi'an,710018, China

[2] College of Mechanical and Energy Engineering, Beijing University of Technology, Beijing,100020, China

来源：

Zhongguo Gonglu Xuebao/China Journal of Highway and Transport | 2024年 / 37卷 / 09期

关键词：

In rccent years; the market sharc of AMT heavy semi-trailer tractor (AMT tractor hereinafter) in China has expanded rapidly. However; research pertaining to this vehicle type has not progressed accordingly with this trend; and the vehicle Performance can be further improved. Thus; typical driving cycles for AMT tractors in China should be established; shifting scenarios analyzed; and stylistic cycles construeted to facilitate the optimization of AMT shifting strategies. This will improve the power; economic; and environmental Performances of thc vchiclc and allow thc advantages of AMT tractors to bc leveraged more effectively. Using measured data of the vehicle; the Douglas-Peucker algorithm was applied to disperse the speed and power indicators such that the difference and trend data of the two indicators can be obtained. Subsequently; four typical shifting scenarios; i; e; acceleration; deceleration; starting; and parking; were efficiently constructed; and the shifting speeds; power-consumption fluctuation; number of shifts; and shifting load were counted and analyzed under different scenarios. Next; a non-freeway driving cycle was constructed using the improved short-trip mcthod combined with the t-SNE and K-means algorithms; and a freeway driving cycle was constructed using the Markov chain method to compensate for the intrinsic defects of the short-trip method. Finally; based on thc non-freeway driving cycle; an objective scoring method was used to distinguish between conservative and aggressive difference data; after which they were superimposed on thc non-freeway cycle skeleton to construet style cycles more flcxibly. The results are as follows: The shifting velocity of the AMT tractor is particularly evident in two intervals; 0-20; and; 55-70; km; •; h~; and the four typical shifting scenarios are different from each other. This implics that the dynamics and economic tendency of the shifting strategy should be dynamically adjusted depending on the scenario. The average relative error (MRE) of the indicators for the freeway and non-freeway driving cycles are 4. 834% and 3. 431%; respectively (while the latter reduced by 27. 49% compared with thc conventional method); and the MREs of thc simulated fuel consumption are 6. 68% and 3. 97%; respectively; thus indicating that the two cycles are superior to the Standard cycles of CHTC-TT and C-WTVC. The MREs of both the aggressive and conservative driving cycles are approximately 5. 6%; which indicates that they can be used to evaluate the Performance of the shifting strategy under different driving intensities. The MREs based on the conventional method and style cycles exceed 3. 431%; which indicates that the driving bchavior data must be separated during the construetion of the driving cycle to mitigate the negative impact. © 2024 Chang'an University. All rights reserved;

D O I：

10.19721/j.cnki.1001-7372.2024.09.025

中图分类号：

学科分类号：

摘要：

引用

页码：312 / 326

共 50 条

[31] Dynamic model and tracking control of tractor semi-trailer vehicle with underactuated system
You, Feng
Zhang, Rong-Hui
Wang, Hai-Wei
Xu, Jian-Min
Wen, Hui-Ying
Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2014, 44 (05): : 1296 - 1302
[32] Stability Control on Tractor Semi-trailer during Split-mu Braking
Zhou, Shuwen
Zhang, Siqi
Zhao, Guangyao
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3, 2011, 230-232 : 549 - 553
[33] Effect of Cab Suspension Configuration and Location on Tractor Semi-Trailer Driver Comfort
Roy, Judhajit
Law, E. Harry
SAE INTERNATIONAL JOURNAL OF COMMERCIAL VEHICLES, 2016, 9 (02) : 405 - 416
[34] The Analysis of Manoeuvrability of Semi-trailer Vehicle Combination
Jagelcak, Juraj
Kiktova, Monika
Francak, Marcel
LOGI 2019 - HORIZONS OF AUTONOMOUS MOBILITY IN EUROPE, 2020, 44 : 176 - 181
[35] Minimum Swept-Path Control for Autonomous Reversing of a Tractor Semi-Trailer
Liu, Xuanzuo
Madhusudhanan, Anil K.
Cebon, David
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2019, 68 (05) : 4367 - 4376
[36] Braking stability of tractor-semitrailer based on gear-shifting strategy of hydraulic retarder
He R.
Chen S.-S.
Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2017, 47 (06): : 1677 - 1687
[37] A Gain-Scheduled PID Controller for Automatic Path Following of a Tractor Semi-Trailer
Ding, Nenggen
Zhang, Yipeng
Gao, Feng
Xu, Guoyan
SAE INTERNATIONAL JOURNAL OF COMMERCIAL VEHICLES, 2013, 6 (01) : 110 - 117
[38] Trajectory Tracking Control Algorithm of Emergency Collision Avoidance for Tractor Semi-trailer Combination
Li D.
Zha A.
Xu B.
Zhang J.
Qiche Gongcheng/Automotive Engineering, 2022, 44 (07): : 1098 - 1106+1115
[39] Liquid sloshing reduces driving stability of semi-trailer liquid tank
Hu, Xiaoming
Li, Wanli
Sun, Li
Zhao, Zhiguo
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2013, 29 (06): : 49 - 58
[40] Analysis on the gear-shifting schedule of hydraulic automatic transmission
席军强
唐高强
翟涌
张国鑫
顾宏弢
Journal of Beijing Institute of Technology, 2016, 25 (01) : 42 - 48

← 1 2 3 4 5 →