Enhanced Impeller Gas-Liquid Flow Using Ribs for High Performance of Centrifugal Pump

被引：0

作者：

Toumi, Bessam ^{[1
]}

Atif, Abdelmadjid ^{[1
]}

Bennaceur, Mohamed Amine ^{[2
]}

机构：

[1] Univ Sci & Technol Houari Boumediene, Fac Mech & Proc Engn, Lab Energet Mech & Convers Syst, Algiers, Algeria

[2] Algerian Space Agcy, Dept Sci & Technol Watch, Algiers, Algeria

来源：

INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS | 2024年 / 38卷 / 04期

关键词：

Centrifugal pump; two-phase flow; performance deterioration; improved performance; ribs; 2-PHASE FLOW; NUMERICAL-SIMULATION; PATTERNS; CFD;

D O I：

10.1080/10618562.2024.2421018

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Transporting two-phase fluids presents a challenge due to their negative effects on centrifugal pump performance. The accumulation of gas bubbles in the pump impeller forms large gas pockets, reducing efficiency. This work aims to improve the performance of a two-phase flow centrifugal pump by modifying the pump impeller through the addition of ribs. These ribs are positioned near gas bubble accumulation. The modified impeller helps to disperse this accumulation, thereby enhancing pump performance. A study was conducted to evaluate the effect of ribs on the pump efficiency. The results showed a negative effect in low (GVF) and single-phase flows. However, at high GVF, the ribs significantly improved head up to 9%. Moreover, rib characteristics, such as diameter and radial position, were key parameters affecting the pump's efficiency. The ribs with a diameter of 1 mm and a radial position of 33 mm showed the best performance.

引用

页码：316 / 327

页数：12

共 50 条

[31] GAS-LIQUID TWO-PHASE FLOW PATTERN ANALYSIS INSIDE A CENTRIFUGAL IMPELLER BASED ON CFD RESULTS
Si, QiaoRui
PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2018, VOL 3, 2018,
[32] FLUCTUATING FLOW BEHIND THE IMPELLER OF CENTRIFUGAL PUMP
YUASA, T
HINATA, T
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1979, 22 (174): : 1746 - 1753
[33] FLOW OF CAVITATION BUBBLES IN A CENTRIFUGAL PUMP IMPELLER
MINEMURA, K
KIKUYAMA, K
MURAKAMI, M
UCHIYAMA, T
JSME INTERNATIONAL JOURNAL SERIES II-FLUIDS ENGINEERING HEAT TRANSFER POWER COMBUSTION THERMOPHYSICAL PROPERTIES, 1988, 31 (01): : 30 - 38
[34] Numerical investigation on the gas-liquid entraining and separating effects on self-priming performance in a flow-ejecting centrifugal pump
Li, Guidong
Wang, Yang
Mao, Jieyun
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2019, 233 (02) : 232 - 248
[35] Force characteristics of gas-liquid two-phase centrifugal pump
Luo X.
Yan S.
Feng J.
Zhu G.
Sun S.
Chen S.
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2019, 35 (23): : 66 - 72
[36] CENTRIFUGAL PUMP TACKLES 50-50 GAS-LIQUID MIXTURES
GROHMANN, M
CHEMICAL ENGINEERING, 1990, 97 (10) : 237 - 238
[37] GAS-LIQUID CONTACTING WITH IMPELLER MIXERS
OLDSHUE, JY
CONNELLY, FL
CHEMICAL ENGINEERING PROGRESS, 1977, 73 (03) : 85 - 89
[38] Study on measures to improve gas-liquid phase mixing in a multiphase pump impeller under high gas void fraction
Zhang, J. Y.
Zhu, H. W.
Ding, K.
Qiang, R.
26TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, PTS 1-7, 2013, 15
[39] Experimental investigation on the gas-liquid flow patterns in a centrifugal pump during self-priming process
Qian, Heng
Mou, Jiegang
Wu, Denghao
Pen, Yun
Zheng, Shuihua
Zhu, Zhibing
AIP ADVANCES, 2020, 10 (01)
[40] Investigation on gas-liquid two-phase flow centrifugal pump performances for different rotational speeds
Cui, Q. L.
Si, Q. R.
Bois, G.
Yuan, S. Q.
Yuan, J. P.
29TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, 2019, 240

← 1 2 3 4 5 →