Shear Strengthening of RC Beams Incorporating Post-Tensioned Bars and Engineered Cementitious Composite Reinforced with Palm Fronds

被引:0
|
作者
Hamoda, Ahmed [1 ]
Abadel, Aref A. [2 ]
Sennah, Khaled [3 ]
Ahmed, Mizan [4 ]
Zhang, Xihong [4 ]
Emara, Mohamed [5 ,6 ]
机构
[1] Kafrelsheikh Univ, Fac Engn, Dept Civil Engn, Kafrelsheikh 6860404, Egypt
[2] King Saud Univ, Coll Engn, Dept Civil Engn, Riyadh 11421, Saudi Arabia
[3] Toronto Metropolitan Univ, Dept Civil Engn, Toronto, ON M5B 2K3, Canada
[4] Curtin Univ, Ctr Infrastructure Monitoring & Protect, Sch Civil & Mech Engn, Kent St, Bentley, WA 6102, Australia
[5] Zagazig Univ, Fac Engn, Struct Engn Dept, POB 44519, Zagazig 7120001, Egypt
[6] Delta Higher Inst Engn & Technol, Dept Civil Engn, Talkha 7623184, Egypt
关键词
shear strengthening; palm fronds; post-tensioned steel bars; engineered cementitious composite; experimental testing; numerical analysis; CONCRETE BEAMS; FLEXURAL BEHAVIOR; ECC; FIBERS;
D O I
10.3390/buildings14103277
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper investigates, experimentally and numerically, the shear strengthening of Normal Concrete (NC) beams using post-tensioning steel bars and Engineered Cementitious Composite (ECC) reinforced with chemically cured Palm Fronds (PFs). The benefits of strain-hardening ECC and the tensile strength of PFs cured with 6% wt Alkali NaOH solution beside post-tensioned bars have been employed herein. Seven full-scale Reinforced Concrete (RC) beams were fabricated and experimented with under three-point loading until failure. The test parameters include the strengthening technique, type, and configuration of the material used for strengthening. The strengthening process has been implemented through two techniques: Externally Bonded Reinforcement (EBR) and Near-Surface Mounted (NSM) Reinforcement. The strengthening materials have been configured and placed in horizontal, vertical, and inclined positions. The effectiveness of the strengthening methods has been evaluated by examining their cracking propagations, load-deflection responses, collapse modes, elastic stiffness, and absorbed energy. It was found that the proposed strengthening systems could significantly control the crack pattern and failure mode, and they could enhance the ultimate load amplitude up to 37% and 50% for NSM ECC with PFs and EBR post-tensioning steel bars, respectively. Nonlinear three-dimensional finite element models of the tested beams were developed and validated with the test data, where it was found that finite element models predict the structural performance of tested beams with a maximum error of only 2%.
引用
收藏
页数:25
相关论文
共 50 条
  • [31] Experimental and numerical investigations of the effectiveness of engineered cementitious composites and stainless steel plates in shear strengthening of reinforced concrete beams
    Hamoda, Ahmed
    Ahmed, Mizan
    Sennah, Khaled
    STRUCTURAL CONCRETE, 2023, 24 (02) : 2778 - 2799
  • [32] Hybrid strengthening of RC beams with externally bonded carbon fiber reinforced polymer laminate and engineered cementitious composites transition layer
    Su, Yanli
    Wu, Chang
    Wang, Guolin
    Shang, Jiaqi
    Zhang, Pu
    ADVANCES IN STRUCTURAL ENGINEERING, 2024, 27 (11) : 1849 - 1861
  • [33] Damage Monitoring of Engineered Cementitious Composite Beams Reinforced with Hybrid Bars Using Piezoceramic-Based Smart Aggregates
    Qian, Hui
    Zhang, Yuqing
    Li, Yuechang
    Gao, Jundong
    Song, Jianxue
    SENSORS, 2022, 22 (19)
  • [34] Evaluation of the flexural behavior and serviceability of engineered cementitious composite-coral aggregate concrete beams reinforced with BFRP bars
    Liang, Xiangzhou
    Yin, Shiping
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 308
  • [35] Experimental and theoretical studies on the shear resistance of reinforced engineered cementitious composite beams with GFRP rebars and natural fibers
    Belsiah Darling, Raja
    Maheswaran, Chellapandian
    S. P, Murali Kannan
    Mechanics of Advanced Materials and Structures, 2024,
  • [36] Experimental and theoretical studies on the shear resistance of reinforced engineered cementitious composite beams with GFRP rebars and natural fibers
    Darling, Raja Belsiah
    Maheswaran, Chellapandian
    Kannan, S. P. Murali
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
  • [37] Externally bonded and anchored engineered cementitious composite and glass fiber mesh strips for enhancing defected RC beams in shear
    Elsamak, Galal
    Alkhawaldeh, Ayah A.
    Badawi, Moataz
    Alshammari, Emad
    Tawfik, Taher A.
    Ghalla, Mohamed
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2025, 22
  • [38] Experimental and analytical study on shear behavior of strain-hardening cementitious composite beams reinforced with fiber-reinforced polymer bars
    Gu, Dawei
    Pan, Jinlong
    Lukovic, Mladena
    He, Jixuan
    STRUCTURAL CONCRETE, 2022, 23 (02) : 1080 - 1099
  • [39] Experimental and analytical flexural performances of reinforced concrete beams strengthened with post-tensioned near surface mounted basalt composite laminates
    Gil, Lluis
    Bernat-Maso, Ernest
    Escrig, Christian
    COMPOSITES PART B-ENGINEERING, 2019, 157 : 47 - 57
  • [40] Shear strengthening of simply-supported deep beams with openings incorporating combined steel-reinforced engineered cementitious composites and externally bonded carbon fibre-reinforced polymer sheets
    Sennah, Khaled
    Hamoda, Ahmed
    Abadel, Aref
    Yehia, Saad
    Shahin, Ramy
    MAGAZINE OF CONCRETE RESEARCH, 2024, : 154 - 170