Production and test of BI-RPC detectors for ATLAS Phase-2 upgrade

被引：0

作者：

Perrone, M. F. ^{[1
,2
]}

机构：

[1] Unical, Phys Dept, Via Pietro Bucci, I-87036 Arcavacata Di Rende, Italy

[2] INFN Cosenza, Grp Collegato, Via Pietro Bucci, I-87036 Arcavacata Di Rende, Italy

来源：

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT | 2024年 / 1069卷

关键词：

RPC; Trigger; ATLAS;

D O I：

10.1016/j.nima.2024.169963

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The current Resistive Plate Chamber (RPC) system is undergoing a major upgrade [1], consisting in the installation of approximately 1000 RPC detector units in the innermost barrel layer of the ATLAS Muon Spectrometer. The goal of the project is to increase the detector coverage, currently limited to approximately 80%, and improve the trigger robustness and efficiency. The production of the gas volumes takes place in Italy, in Germany and China, while the readout panels in Cosenza (Italy) and Hefei (China). The Italian collaboration is taking care of the construction and test of the chambers located in the large sectors of the ATLAS barrel (BIL). Here we present the state of the art of the production, certification and logistics related to all the components produced at the Italian sites, as well as the assembly line and characterization of the BIL chambers at CERN with cosmic rays. The certification results of the components produced are analysed and discussed.

引用

页数：2

共 50 条

[21] CMS Timing Detectors in Phase-2
Pandolfi, Francesco
7TH ANNUAL CONFERENCE ON LARGE HADRON COLLIDER PHYSICS, LHCP2019, 2019,
[22] The ATLAS RPC Phase-II upgrade for High Luminosity LHC era
Falsetti, Gregorio
ATLAS Muon Community, A. T. L. A. S.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2024, 1068
[23] Front-end hybrid designs for the CMS Phase-2 Upgrade towards the production phase
Kovacs, M.
Blanchot, G.
Gadek, T.
Hollos, A.
Dominguez, I
Zografos, A.
JOURNAL OF INSTRUMENTATION, 2022, 17 (04):
[24] A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade
Huang, X.
Liu, C.
Deiana, A.
Deng, B.
Gong, D.
Hasley, L.
Hou, S.
Liu, T.
Sun, H.
Ye, J.
Zhang, L.
Zhang, W.
JOURNAL OF INSTRUMENTATION, 2022, 17 (05):
[25] An Updated Front-End Data Link Design for the Phase-2 Upgrade of the ATLAS Tile Calorimeter
Silverstein, Samuel
Santurio, Eduardo Valdes
Bohm, Christian
2017 IEEE NUCLEAR SCIENCE SYMPOSIUM AND MEDICAL IMAGING CONFERENCE (NSS/MIC), 2017,
[26] Hybrids pre-production results for the CMS Outer Tracker Phase-2 Upgrade
Blanchot, G.
Abbas, M.
Ahmed, I.
Allongue, B.
Andreou, D.
Carnesecchi, R.
Klein, K.
Kovacs, M.
Lapornik, A.
La Rosa, A.
Lipinski, M.
Najafabadi, M. Mohammadi
Pauls, A.
Sultan, A.
Szydlik, P.
Zografos, A.
JOURNAL OF INSTRUMENTATION, 2025, 20 (03):
[27] The Phase-2 Upgrade of the Hardware Trigger of CMS at the LHC
Jeitler, M.
JOURNAL OF INSTRUMENTATION, 2020, 15 (09):
[28] Hybrid designs and kick-off batch production experience for the CMS Phase-2 Upgrade
Kovacs, M.
Abbas, M.
Ahmed, I.
Blanchot, G.
Honma, A.
Rosa, A. La
Dominguez, I. Mateos
Klein, K.
Najafabadi, M. Mohammadi
Schleidweiler, K.
Szydlik, P.
Zografos, A.
JOURNAL OF INSTRUMENTATION, 2024, 19 (04)
[29] Silicon sensors for the Phase-2 upgrade of the CMS Outer Tracker; status and early results from the production phase
Damanakis, Konstantinos
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2022, 1040
[30] Mass production of RPC readout panels for ATLAS Phase-II upgrade and R&D on thin gas gap production at USTC
Du, Dongshuo
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2025, 1075

← 1 2 3 4 5 →