Mold compaction in lost foam casting

被引：0
|
作者：
Shulyak, V.S. [1 ]
机构：
[1] MGIU, Moscow, Russia
来源：
Litejnoe Proizvodstvo | 1999年 / 05期
关键词：
Densification - Foundry sand - Metal casting - Performance - Porosity - Quartz applications - Vibrations (mechanical) - Vibrators;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Operation of vibrator at the spring-actuated base for densification of molds of lost foam casting is considered. The mold box is free or connected firmly with vibration table forming united system of 'table-mold box-sand'. The vibration densification process is studied depending on mold box position. The dependences of porosity coefficients and densification of quartz sand upon ratio of vibration acceleration - gravity and grain shape are analyzed. It is shown that the insufficiently-dense mold takes place at mold box free position.
引用
收藏
页码：30 / 32
相关论文
共 50 条
  • [31] Developments in lost foam casting of magnesium
    Marlatt, M
    Weiss, D
    Hryn, JN
    MAGNESIUM TECHNOLOGY 2003, 2003, : 141 - 146
  • [32] Lost foam casting of magnesium alloys
    Han, Q.
    Dinwiddie, R.
    Sklad, P.
    Currie, K.
    Vondra, F.
    Abdelrahman, M.
    Walford, G. V.
    Nolan, D.
    Nedkova, T.
    MAGNESIUM TECHNOLOGY 2007, 2007, : 115 - +
  • [33] CARMAKERS INVEST IN LOST FOAM CASTING
    MULLINS, PJ
    AUTOMOTIVE INDUSTRIES, 1984, 164 (02): : 60 - 60
  • [34] Development and optimization of novel sensors for inline measurement of sand filling and compaction stages in lost foam casting
    Whelan, MJ
    Janoyan, KD
    Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies, 2005, 5762 : 80 - 87
  • [35] Determination of the heat transfer coefficient at the metal-sand mold interface of lost foam casting process
    Zhang, Liqiang
    Tan, Wenfang
    Hu, Hao
    HEAT AND MASS TRANSFER, 2016, 52 (06) : 1131 - 1138
  • [36] Numerical modeling and experimental verification of mold filling and evolved gas pressure in lost foam casting process
    Liu, Y
    Bakhtiyarov, SI
    Overfelt, RA
    JOURNAL OF MATERIALS SCIENCE, 2002, 37 (14) : 2997 - 3003
  • [37] Effect of mold media on solidification of A356 Al-Si alloy in Lost foam casting
    Ajdar, R
    Ravindran, C
    McLean, A
    LIGHT METALS 2000 METAUX LEGERS, PROCEEDINGS, 2000, : 615 - 633
  • [38] Numerical modeling and experimental verification of mold filling and evolved gas pressure in lost foam casting process
    Y. Liu
    S. I. Bakhtiyarov
    R. A. Overfelt
    Journal of Materials Science, 2002, 37 : 2997 - 3003
  • [39] Recent Development of Lost Foam Casting Technology Comment on the 7th Chinese Lost Foam Casting Symposium
    LIU Zi-li (College of Material Science & Engineering
    ChinaFoundry, 2006, (03) : 224 - 228
  • [40] Simulation of EPS foam decomposition in the lost foam casting process
    Liu, X. J.
    Bhavnani, S. H.
    Overfelt, R. A.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 182 (1-3) : 333 - 342
12345