Effect of Oxidation in Different Media on Gas Yield of Steel 12Cr18Ni10Ti in a Vacuum.

被引：0
|
作者：
Makarova, V.I.
Safonov, A.N.
Skibina, G.V.
Erokhina, V.I.
机构：
来源：
Izvestia vyssih ucebnyh zavedenij. Masinostroenie | 1979年 / 10期
关键词：
VACUUM TECHNOLOGY;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
It is shown that the heating of corrosion-resistant steel 12Kh18N10T (12Cr18Ni10Ti) at the temperature of 600C for 2-3 h in a medium with a low partial oxygen pressure (in a vacuum or alternatively in a vacuum and in hydrogen) favors the formation of oxide films on its surface. These films have good protective qualities owing to their high alloying with chromium. A gas yield investigation has shown that the overall rate of gas yield by this steel after heating in hydrogen and vacuum decreases approximately by a factor of 16 compared with passivated steel.
引用
收藏
页码：110 / 114
相关论文
共 50 条
  • [21] Unusual enhancement of ductility observed during evolution of a deformation wave in 12Cr18Ni10Ti stainless steel irradiated in BN-350
    Gusev, M.N.
    Maksimkin, O.P.
    Osipov, I.S.
    Silniagina, N.S.
    Garner, F.A.
    Journal of ASTM International, 2009, 6 (07):
  • [22] Improving the Technology Used in Fabrication of Tube Bundles of Heat Exchangers Produced from 12Cr18Ni10Ti Steel by Means of Friction Welding
    A. V. Yakhin
    D. V. Karetnikov
    R. G. Rizvanov
    E. M. Abutalipova
    A. G. Gareev
    A. S. Tokarev
    Chemical and Petroleum Engineering, 2019, 54 : 801 - 805
  • [23] Anomalously large deformation of 12Cr18Ni10Ti austenitic steel irradiated to 55 dpa at 310 °C in the BN-350 reactor
    Gusev, M. N.
    Maksimkin, O. P.
    Osipov, I. S.
    Garner, F. A.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 386-88 : 273 - 276
  • [24] IMPROVING THE TECHNOLOGY USED IN FABRICATION OF TUBE BUNDLES OF HEAT EXCHANGERS PRODUCED FROM 12Cr18Ni10Ti STEEL BY MEANS OF FRICTION WELDING
    Yakhin, A. V.
    Karetnikov, D. V.
    Rizvanov, R. G.
    Abutalipova, E. M.
    Gareev, A. G.
    Tokarev, A. S.
    CHEMICAL AND PETROLEUM ENGINEERING, 2019, 54 (11-12) : 801 - 805
  • [25] 等离子弧焊对12Cr18Ni10Ti低周腐蚀疲劳寿命的影响
    栾江峰
    丁启敏
    石油化工腐蚀与防护, 2007, (03) : 11 - 12
  • [26] Wetting 12Cr18Ni10Ti and EK-173 reactor steels using a eutectic melt of PbBi and alloys of it with lithium
    Alchagirov B.B.
    Dyshekova F.F.
    Karamurzov B.S.
    Taova T.M.
    Khokonov K.B.
    Bulletin of the Russian Academy of Sciences: Physics, 2016, 80 (11) : 1391 - 1395
  • [27] CHEMICAL POLARIZATION OF 12CR18NI9TI STEEL
    SOROKINA, LA
    RUSETSKAYA, AN
    CHINOVA, MP
    JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1987, 60 (08): : 1756 - 1758
  • [28] RESISTANCE TO THERMAL FATIGUE OF CR18NI10TI STEEL
    TULYAKOV, GA
    THERMAL ENGINEERING, 1972, 19 (06) : 17 - 21
  • [29] Experimental and numerical analysis of filler metal STEMET 1301A for connection of molybdenum with steel 12CR18NI10TI (Withdrawal of Vol 295, art no 116683, 2021)
    Lublinsky, I. E.
    Sevryukov, O. N.
    Vertkov, A. V.
    Ivannikov, A. A.
    Penyaz, M. A.
    Fedotov, I. V.
    Peklich, A. S.
    Abramov, E. R.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 295
  • [30] THE EFFECT OF LENGTHY OPERATION ON THE SERVICE LIFE OF 12CR18NI12TI STEEL SUPERHEATING TUBES
    SMIRNOVA, AP
    BULANOV, YP
    THERMAL ENGINEERING, 1987, 34 (11) : 620 - 622
12345