Experience with Excess Pressure Gas Quenching and Carburization in Vacuum Furnaces.

被引：0

作者：

Limque, Ferdinand

Bless, Franz

机构：

来源：

Haerterei-Technische Mitteilungen | 1980年 / 35卷 / 05期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

For accelerated gas quenching of workpieces during hardening in vacuum furnaces a new furnace was developed in which quenching occurs under a pressure of up to 5 bar. The hitherto attainable quenching rate is increased thereby severalfold. It was found that during carburization in vacuum furnaces the swirling of the gas in the combustion chamber, combined with periodically repeated and controlled pressure oscillations, leads to good uniformity in the carburization of production heats.

引用

页码：238 / 244

共 50 条

[41] POROUS PLUG GAS INJECTION IN ANODE REFINING FURNACES.
Goyal, P.
Joshi, S.V.
Wang, J.
Journal of Metals, 1983, 35 (12): : 52 - 58
[42] Advances in increasing the quenching speed of single-chamber vacuum furnaces with high-pressure gas-quench systems
Bless, F
Edenhofer, B
HEAT TREATMENT OF METALS, 1997, 24 (04): : 89 - 91
[43] Vacuum heat treatment - vacuum carburizing with high-pressure gas quenching
Heilmann, P
STAHL UND EISEN, 1997, 117 (10): : 47 - &
[44] USE OF SILICON-CARBIDE REFRACTORIES IN GAS CARBURIZATION FURNACES
FRAIFELD, MS
KRASOTKINA, NI
CHISTYAKOVA, MV
ERSHOVA, GD
BUSLOVICH, NM
MIKHAILOV, LA
PAVLOVA, VM
REFRACTORIES, 1979, 20 (11-1): : 750 - 752
[45] HIGH PRESSURE GAS QUENCHING OF TOOL STEELS IN VACUUM.
Neiderman, J.M.
Industrial Heating, 1985, 52 (06): : 20 - 23
[46] Determining the air excess in the heating of coke furnaces. 2. Sampling and analysis
Zublev D.G.
Barsky V.D.
Coke and Chemistry, 2016, 59 (11) : 414 - 416
[47] Vacuum and plasma carburising with high-pressure gas quenching
Preisser, F
HEAT TREATMENT OF METALS, 1998, 25 (03): : 65 - 71
[48] TISCO'S EXPERIENCE IN IMPROVING THE PERFORMANCE OF ITS BLAST FURNACES.
Kapadia, Y.S.
Chatterjee, L.M.
Singh, D.P.
Ghosh, S.K.
Prasad, A.
TISCO (Tata Iron and Steel Co), 1980, 27 (1-4): : 65 - 70
[49] Low pressure carburizing with high pressure gas quenching in batch type furnaces and continuous plants
Altena, H
Schrank, F
INTERNATIONAL CONFERENCE ON GEARS, VOLS 1 AND 2, 2002, 1665 : 649 - 662
[50] GAS-FIRED GRAVITY AND FAN TYPE FLOOR FURNACES.
Anon
American National Standards Institute, Standards, 1979, (Z21. 48):

← 1 2 3 4 5 →