Promising processes of rolling and drawing of small-diameter bearing tubes

被引：0

作者：

Kharitonov, V.V. ^{[1
]}

Ermakov, V.M. ^{[1
]}

Ivko, D.M. ^{[1
]}

Zyryanov, A.E. ^{[1
]}

Zyryanova, V.S. ^{[1
]}

机构：

[1] Ural'skij Gosudarstvennyj, Tekhnicheskij Univ, Ekaterinburg, Russia

来源：

Stal' | 1994年 / 04期

关键词：

Bearing mountings - Cold rolling - Deformation - Drawing (forming) - Hardening - Heat treatment - Hot rolling - Microstructure - Steel - Temperature control;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

It is shown that it is possible to raise the rate and to extend the range of the production of small bearing tubes. This results from an advanced flow-sheet which involves screw- and lengthwise rolling of a billet less than 60 mm in diameter followed by single-pass or multipass plug and/or without mandrel drawing. These processes were used to manufacture a commercial lot of bearing tubes of a steel ShKh15 23×45 mm, 31×4.5 mm in size, etc.

引用

页码：56 / 58

共 50 条

[1] PROMISING PROCESSES OF SMALL BALL-BEARING TUBE ROLLING AND DRAWING
KHARITONOV, VV
ERMAKOV, VM
IVKO, DM
ZYRYANOV, AE
ZYRYANOVA, VS
STEEL IN TRANSLATION, 1994, 24 (04) : 23 - 24
[2] Influence of Cold-Rolling Processes on the Dimensional Accuracy and Roughness of Small-Diameter Thick-Walled Seamless Tubes
Ding, Xiuping
Li, Ran
Jin, Pengfei
Wang, Weijie
Zhang, Cheng
Ma, Minyu
Huang, Jinfeng
METALS, 2024, 14 (11)
[3] Evolution of Microstructure and Properties of 16MnNiV Small-Diameter Seamless Steel Tubes in Cold Drawing and Heat Treatment Processes
Jiang, Chunhui
Li, Han
Li, Zhaodong
Wei, Wei
Cao, Yanguang
Zhang, Chao
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
[4] STRENGTH OF SMALL-DIAMETER ELECTRICALLY WELDED TUBES
MONOSHKO.AM
SVETLAKO.VA
GAZMAN, SM
GRINBERG, ZA
PYKHOV, SI
WELDING PRODUCTION, 1971, 18 (11): : 34 - &
[5] STRAIGHTENING SMALL-DIAMETER TUBES ON DRUM EQUIPMENT
SEMENENKO, YL
VARAVA, LM
STEEL IN THE USSR, 1975, 5 (01): : 60 - 61
[6] Coke from small-diameter tubes analyzed
Albright, Lyle F.
1600, (86):
[7] Efficient technology for making ultra-thick-walled small-diameter tubes of bearing steel
Kharitonov, VV
Bogatov, AA
METALLURGIST, 2004, 48 (7-8) : 328 - 334
[8] Efficient Technology for Making Ultra-Thick-Walled Small-Diameter Tubes of Bearing Steel
V. V. Kharitonov
A. A. Bogatov
Metallurgist, 2004, 48 : 328 - 334
[9] Safety of Small-Diameter Endotracheal Tubes in Microlaryngeal Surgery
Strober, William A.
Enin, Kwasi
Kallogjeri, Dorina
Piccirillo, Jay F.
Komen, Helga
Rohlfing, Matthew L.
LARYNGOSCOPE, 2025, 135 (04): : 1451 - 1454
[10] DETONATION OF GASOLINE - AIR MIXTURES IN SMALL-DIAMETER TUBES
FONBERSHTEIN, EG
EKOMASOV, SP
COMBUSTION EXPLOSION AND SHOCK WAVES, 1978, 14 (03) : 393 - 394

← 1 2 3 4 5 →