Stress-strain curves of carbon fiber strand at several strain rates including impact loading range

被引:0
|
作者
Kinari, Toshiyasu [1 ]
Shintaku, Sukenori [1 ]
Iwaki, Nobuo [1 ]
Shibata, Hirofumi [1 ]
机构
[1] Kanazawa Univ, Kanazawa, Japan
来源
Seni Kikai Gakkai Shi/Journal of the Textile Machinery Society of Japan | 1995年 / 48卷 / 11期
关键词
Carbon fibers - Curve fitting - Elastic moduli - Mechanical variables measurement - Strain rate - Stresses;
D O I
暂无
中图分类号
学科分类号
摘要
Stress-strain curves of four kinds of PAN based carbon fiber strands whose fineness were about 8tex were obtained at six strain rates ranging from 3.3 × 10-3s-1 to 4.0 × 102s-1. The stress-strain curves were almost straight, slightly downwards convex and showed little yielding phenomena for any specimens at any strain rates. The elastic modulus linearly increased with the logarithmic plot of strain rates. The breaking elongation linearly decreased with the logarithmic plot of strain rates. The changes of the breaking stress with strain rates was less than the scattering in each measurement.
引用
收藏
页码:50 / 56
相关论文
共 50 条
  • [41] STRESS-STRAIN RELATIONS FOR UNIAXIAL LOADING
    PALM, JH
    APPLIED SCIENTIFIC RESEARCH SECTION A-MECHANICS HEAT CHEMICAL ENGINEERING MATHEMATICAL METHODS, 1948, 1 (03): : 198 - 214
  • [42] Influence of strain rate on the stress-strain curve in the range of Luders strain
    ElMagd, E
    Scholles, H
    Weisshaupt, H
    STEEL RESEARCH, 1996, 67 (11): : 495 - 500
  • [43] Stress-strain relationship for periodic loading
    Kapustin V.I.
    Stepanov V.M.
    Journal of Applied Mechanics and Technical Physics, 2006, 47 (3) : 384 - 389
  • [44] PLOTTING STRESS-STRAIN CURVES UNDER DIFFERENT CYCLIC-LOADING CONDITIONS
    TSYBANEV, GV
    MISHCHENKO, YD
    STRENGTH OF MATERIALS, 1981, 13 (05) : 586 - 591
  • [45] DETERMINATION OF PARAMETERS FOR THERMALLY ACTIVATED GLIDE FROM STRESS-STRAIN CURVES AT DIFFERENT TEMPERATURES AND STRAIN RATES
    CHANDLER, HD
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (12): : 2975 - 2978
  • [46] NOTES ON INVARIANCE OF STRESS-STRAIN CURVES OF ISOTROPIC METALS UNDER COMPLEX LOADING
    NIKITIN, OY
    RUSSIAN ENGINEERING JOURNAL, 1976, 56 (09): : 33 - 34
  • [47] True stress-strain curve acquisition for irradiated stainless steel including the range exceeding necking strain
    Kamaya, Masayuki
    Kitsunai, Yuji
    Koshiishi, Masato
    JOURNAL OF NUCLEAR MATERIALS, 2015, 465 : 316 - 325
  • [48] Stress-strain relationships of polycarbonate over a wide range of strain rate, including a shock wave regime
    Sato, Y.
    Yoshida, M.
    Nagayama, K.
    Horie, Y.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2008, 35 (12) : 1778 - 1783
  • [49] A Model of Undrained Stress-Strain Curves Considering Stress Path and Strain Softening
    Jia, Mincai
    Luo, Wensen
    Zhou, Yunhong
    Zhao, Shun
    Zhang, Zhen
    INTERNATIONAL JOURNAL OF GEOMECHANICS, 2021, 21 (11)
  • [50] Measurement of epoxy resin tension, compression, and shear stress-strain curves over a wide range of strain rates using small test specimens
    Littell, Justin D.
    Ruggeri, Charles R.
    Goldberg, Robert K.
    Roberts, Gary D.
    Arnold, William A.
    Binienda, Wieslaw K.
    Journal of Aerospace Engineering, 2008, 21 (03): : 162 - 173