Flow measurements in a centrifugal pump impeller handling viscous oil

被引：0
|
作者：
Wenguang, Li
机构：
来源：
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering | 2000年 / 36卷 / 06期
关键词：
Flow measurement - Laser Doppler velocimeters - Rotors - Turbomachine blades - Viscous flow;
D O I：
10.3901/jme.2000.06.033
中图分类号：
学科分类号：
摘要：
Flows of viscous oil in a centrifugal pump impeller with large discharge and small wrapping angles of blade are measured by using a two-dimensional laser Doppler velocimeter at the best efficiency and part-loading points, respectively, and the features of the flow are analyzed. The tested results show that a wake separated is found near the suction side and a jet does not exist rear blade pressure side, so that the wellknown jet/wake flow model is not found in the impeller tested. The range that the wake covers is enlarged while the pump working condition is changed from the best efficiency to the part-loading points. The wake separated should be weakened or eliminated to improve the hydraulic performance while the impeller handling viscous oils.
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [31] DMD analysis on the unsteady flow in a centrifugal pump impeller
    Chen X.
    Zhang R.
    Jiang L.
    Guo G.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2022, 41 (14): : 33 - 40and57
  • [32] LASER VELOCIMETER MEASUREMENTS IN A CENTRIFUGAL PUMP WITH A SYNCHRONOUSLY ORBITING IMPELLER
    BEAUDOIN, RJ
    MINER, SM
    FLACK, RD
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1992, 114 (02): : 340 - 349
  • [33] Analysis of flow measurements in the impeller and vaned diffuser of a centrifugal pump operating at part load.
    Toussaint, M
    Hureau, F
    HYDRAULIC MACHINERY AND CAVITATION, VOLS I AND II, 1996, : 419 - 427
  • [34] A parametric study for improving the centrifugal pump impeller for use in viscous fluid pumping
    Shojaeefard, M. H.
    Tahani, M.
    Khalkhali, A.
    Ehghaghi, M. B.
    Fallah, H.
    Beglari, M.
    HEAT AND MASS TRANSFER, 2013, 49 (02) : 197 - 206
  • [35] Study on Three-Dimensional Viscous Flow of An Aero Centrifugal Pump Impeller Based on Unstructured Hexahedron Grid
    Liu, Xianwei
    Li, Huacong
    Shi, Xinxing
    Fu, JiangFeng
    PROCEEDINGS OF 2018 9TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE 2018), 2018, : 79 - 84
  • [36] A parametric study for improving the centrifugal pump impeller for use in viscous fluid pumping
    M. H. Shojaeefard
    M. Tahani
    A. Khalkhali
    M. B. Ehghaghi
    H. Fallah
    M. Beglari
    Heat and Mass Transfer, 2013, 49 : 197 - 206
  • [37] ANALYSIS OF THE FLOW BETWEEN THE IMPELLER AND PUMP CASING BACK FACE FOR A CENTRIFUGAL PUMP
    Park, Sang Hyun
    Morrison, Gerald L.
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A-C, 2009, : 221 - 235
  • [38] Characteristics of transient flow and pressure fluctuation in impeller for centrifugal pump
    Cao, S. (caoshl@mail.tsinghua.edu.cn), 1600, Chinese Mechanical Engineering Society (50):
  • [39] Visualization study of the transient flow in the centrifugal blood pump impeller
    Tsukiya, T
    Taenaka, Y
    Tatsumi, E
    Takano, H
    ASAIO JOURNAL, 2002, 48 (04) : 431 - 436
  • [40] Flow Characteristics of a Centrifugal Pump with Different Impeller Trimming Methods
    Khoeini, Davood
    Tavakoli, Mohammad Reza
    FME TRANSACTIONS, 2018, 46 (04): : 463 - 468
12345