Abrasive material made of industrial wastes

被引：0
|
作者：
Platonova, N.I.
Rakhimov, A.D.
Yusupov, R.Yu.
机构：
来源：
Steklo i Keramika | 1993年 / 01期
关键词：
Applications - Composition - Industrial wastes - Mechanical properties - Porcelain - Waste treatment - Waste utilization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Aimed at waste utilization and simultaneous solving environmental problems the investigation was made to reveal the possibility of application of porcelain wastes for abrasive material production. The composition and technological procedures were developed for new material intended for wet tumble of buttons. The abrasive was produced in the form of comical granules 20 mm in height and 25 mm in diameter by castings, drying and firing at 1350° C. Physical-mechanical properties of the material obtained were as follows: compression strength under bending - 75 MPa, firing-shrinkage - 0.22%, wearability-0.05 g&middotcm-2.
引用
收藏
相关论文
共 50 条
  • [31] Preparation of porous adsorption material by cascade-recycling of industrial solid wastes
    Sasai, R
    Torazawa, M
    Yano, K
    Zhang, FS
    Itoh, H
    WASTE MANAGEMENT AND THE ENVIRONMENT, 2002, : 71 - 78
  • [32] Emissions analysis from various industrial wastes to be used as raw material for ceramics
    Quaranta, N.
    Caligaris, M.
    Pelozo, G.
    MANAGEMENT OF NATURAL RESOURCES, SUSTAINABLE DEVELOPMENT AND ECOLOGICAL HAZARDS III, 2012, 148 : 313 - 323
  • [33] Co-disposal of industrial wastes to obtain an inert material for environmental reclamation
    Polcaro, AM
    Palmas, S
    Mascia, M
    Renoldi, F
    ANNALI DI CHIMICA, 2000, 90 (1-2) : 103 - 111
  • [34] UTILIZATION OF LOCAL RAW-MATERIAL AND INDUSTRIAL-WASTES IN CERAMIC PRODUCTION
    KRAEV, VM
    GRYADKINA, EA
    GLASS AND CERAMICS, 1977, 34 (11-1) : 749 - 752
  • [35] ECONOMICAL EVALUATION PROBLEMS OF PROCESSING OF SECONDARY MATERIAL RESOURCES AND INDUSTRIAL-WASTES
    TSYGANKOV, AP
    BALATSKY, OF
    KERZHAKOV, VI
    KHIMICHESKAYA PROMYSHLENNOST, 1981, (08): : 499 - 503
  • [36] Technosols made from urban and industrial wastes are a good option for the reclamation of abandoned city plots
    Barredo, Odei
    Vilela, Juan
    Garbisu, Carlos
    Besga, Gerardo
    Alkorta, Itziar
    Epelde, Lur
    GEODERMA, 2020, 377
  • [37] Experimental investigation on the wear behavior of low-cost composite made from industrial wastes
    Venkatesan, S. P.
    Ramachandran, K.
    Kumar, A. John Presin
    Balamurugan, G. M.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2022, 74 (09) : 1049 - 1055
  • [38] ECONOMIES MADE USING ABRASIVE DISKS
    不详
    ENGINEERING MATERIALS AND DESIGN, 1975, 19 (07): : 27 - 27
  • [39] POLISH-MADE ABRASIVE TOOLS
    WOZNIAK, K
    KRASZEWSKI, P
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1982, 55 (8-9): : 475 - 477
  • [40] Cavitational abrasive material for processing with abrasive water jet
    Vasilescu, Mircea
    Binchiciu, Ioan
    Binchiciu, Aurelia
    Simiti, Ioan Vida
    Vasiu, Radu
    Welding in the World, 2007, 51 (SPEC. ISS.) : 599 - 604
12345