Abrasive material made of industrial wastes

被引：0
|
作者：
Platonova, N.I.
Rakhimov, A.D.
Yusupov, R.Yu.
机构：
来源：
Steklo i Keramika | 1993年 / 01期
关键词：
Applications - Composition - Industrial wastes - Mechanical properties - Porcelain - Waste treatment - Waste utilization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Aimed at waste utilization and simultaneous solving environmental problems the investigation was made to reveal the possibility of application of porcelain wastes for abrasive material production. The composition and technological procedures were developed for new material intended for wet tumble of buttons. The abrasive was produced in the form of comical granules 20 mm in height and 25 mm in diameter by castings, drying and firing at 1350° C. Physical-mechanical properties of the material obtained were as follows: compression strength under bending - 75 MPa, firing-shrinkage - 0.22%, wearability-0.05 g&middotcm-2.
引用
收藏
相关论文
共 50 条
  • [1] WASTES MADE INTO WOODLIKE MATERIAL
    不详
    CHEMICAL & ENGINEERING NEWS, 1971, 49 (35) : 21 - &
  • [2] Utilization of some industrial wastes as abrasive in surface preparation processes
    Ataman, N.
    Oezbayoglu, G.
    PROCEEDINGS OF THE 20TH INTERNATIONAL MINING CONGRESS AND EXHIBITION OF TURKEY, NO 133, 2007, : 85 - +
  • [3] ABRASIVE WEAR OF ENGINEERING MATERIALS BY MINERAL AND INDUSTRIAL-WASTES
    BHATTACHARYYA, S
    BOCK, FC
    WEAR, 1978, 46 (01) : 1 - 18
  • [4] Topography of material made by the application of abrasive water jet technology
    Kvietková, M.
    Kvietková, M., 1600, Czech Academy of Agricultural Sciences (60): : 318 - 323
  • [5] Hydration study and characteristic analysis of a sulfoaluminate high-performance cementitious material made with industrial solid wastes
    Yao, Yonggang
    Wang, Wenlong
    Ge, Zhi
    Ren, Changzai
    Yao, Xingliang
    Wu, Shuang
    CEMENT & CONCRETE COMPOSITES, 2020, 112
  • [6] Investigation of Abrasive Wear Behavior of Industrial Wastes on Al 6061 Material Using Rubber Wheel Abrasion Test (RWAT) Method
    Gok, Mustafa Sabri
    Ozliman, Hanife
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2019, 25 (01): : 47 - 53
  • [7] Synthesis and mechanical properties of a calcium sulphoaluminate cement made of industrial wastes
    Gallardo, M.
    Almanza, J. M.
    Cortes, D. A.
    Escobedo, J. C.
    Escalante-Garcia, J. I.
    MATERIALES DE CONSTRUCCION, 2014, 64 (315)
  • [8] Shear Strength of Industrial Wastes and Their Mixtures and Stability of Embankments Made of These Materials
    Gruchot, Andrzej
    Zydron, Tymoteusz
    APPLIED SCIENCES-BASEL, 2020, 10 (01):
  • [9] Shrinkage-compensating admixture for concrete made from industrial wastes
    Chen, Wei
    Yu, Xiu-Feng
    Ou, Yun-Feng
    Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology, 2007, 29 (09): : 88 - 90
  • [10] DESIGN AND INDUSTRIAL ELABORATION OF THERMAL ENERGY STORAGE UNITS MADE OF RECYCLED VITRIFIED INDUSTRIAL WASTES
    Meffre, A.
    Olives, R.
    Py, X.
    Bessada, C.
    Echegut, P.
    Michon, U.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 4, PTS A AND B, 2012, : 757 - 762
12345