FRACTURE CHARACTERISTICS OF 475 degree C EMBRITTLED 30%CR FERRITIC STAINLESS STEELS.

被引:0
|
作者
Yasunaka, Takashi
Kanao, Masao
机构
来源
| 1979年 / 19卷 / 02期
关键词
STEEL; -; Embrittlement;
D O I
10.2355/isijinternational1966.19.69
中图分类号
学科分类号
摘要
Intergranular microcracks are initiated when yield stress increases with aging over the initial twinning stress detected on the stress-strain curve. The unstable fracture occurs with cleavage crack propagation when the criterion for propagation is satisfied. The critical yield stress for the ductile-brittle transition is slightly higher than the initial twinning stress, which varies linearly with the reciprocal square root of grain diameters and is insensitive to the aging temperature. For specimens with coarse grain sizes which have low initial twinning stress, the embrittling time is affected by the hardening behavior in the early stages of aging.
引用
收藏
页码:69 / 75
相关论文
共 50 条
  • [21] SEM-fractography of Oxidized Fracture Surfaces of Ferritic Steels.
    Loehberg, Reinhold
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1981, 72 (10): : 688 - 692
  • [22] FRACTURE TOUGHNESS OF 18CR-2MO FERRITIC STAINLESS-STEEL SUBJECTED TO 475-DEGREES-C EMBRITTLEMENT
    AGREN, J
    JOHANSSON, H
    MATERIALS SCIENCE AND ENGINEERING, 1978, 34 (03): : 285 - 289
  • [23] sigma -PHASE EMBRITTLEMENT IN SOME FERRITIC-AUSTENITIC STAINLESS STEELS.
    Norstrom, L.A.
    Pettersson, S.
    Nordin, S.
    Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1981, 12 (07): : 229 - 234
  • [24] MECHANICAL PROPERTIES OF FE-CR ALLOYS EMBRITTLED AT 475 DEGREES C
    IMAI, Y
    NISHINO, K
    NAKAGAWA, Y
    SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1966, S 18 : 569 - &
  • [25] Effects of Sensitisation at 675 degree C on the Anodic Behaviour of Certain Austenitic Stainless Steels.
    Alderisio, A.
    Brevaglieri, B.
    Giorgi, L.
    Signorelli, G.
    Metallurgia Italiana, 1986, 78 (01): : 45 - 52
  • [26] TEXTURES AND PRECIPITATES IN A 17%Cr FERRITIC STAINLESS STEELS
    Gao Fei
    Liu Zhenyu
    Zhang Weina
    Liu Haitao
    Sun Guangting
    Wang Guodong
    ACTA METALLURGICA SINICA, 2012, 48 (10) : 1166 - 1174
  • [27] Practical guidelines for machining (duplex) austenitic-ferritic stainless steels. Welding duplex steels
    Linee Guida pratiche per la lavorazione di acciai inossidabili austeno - Ferritici
    1600, Instituto Italiano della Saldatura (65):
  • [28] MOSSBAUER-EFFECT STUDY OF 475-DEGREES-C EMBRITTLEMENT OF DUPLEX AND FERRITIC STAINLESS-STEELS
    SOLOMON, HD
    LEVINSON, LM
    ACTA METALLURGICA, 1978, 26 (03): : 429 - 442
  • [29] STOCHASTIC APPROACH TO THE EFFECT OF ALLOYING ELEMENTS ON THE PITTING RESISTANCE OF FERRITIC STAINLESS STEELS.
    Shibata, Toshio
    1600, (23):
  • [30] Effect of Chemical Composition and Impurity Content on the Mechanical Properties of Ferritic Stainless Steels.
    Munteanu, M.
    Gutu, M.
    Laiu, N.
    Glavan, A.
    Andreescu, G.
    Teleasa, A.
    Metalurgia Bucuresti, 1983, 35 (04): : 161 - 167