Concept and basic study of improvement system of surface roughness, waviness and figure accuracy by WORFAC

被引：0
|
作者：
NIKON Corp, Tokyo, Japan [1 ]
机构：
来源：
J Mater Process Technol | / 4卷 / 423-426期
关键词：
Cutting tools - Process control - Surface roughness - Turning;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In ultraprecision machining technology, manufacture of more precise and large elements is expected. The author proposed a new system, named workpiece-referred form accuracy control system (WORFAC), and confirmed an effectiveness of this manufacturing method on a waviness improvement. In this report, we propose a new system with WORFAC, which has three control systems; a waviness control system, a figure control system, and a surface roughness control system. So far, basic studies on the figure and surface roughness control systems are carried out. And the possibility of this new system is confirmed.
引用
收藏
相关论文
共 50 条
  • [41] A comparative study of basic and ensemble artificial intelligence models for surface roughness prediction during the AA7075 milling process
    Gabsi, Abd El Hedi
    Ben Aissa, Chokri
    Mathlouthi, Safa
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (1-2): : 1 - 15
  • [42] Experimental study on surface roughness and dimensional accuracy of hole machining process on GFRP composites using abrasive water jet technique
    Prasad, K. Siva
    Chaitanya, G.
    MATERIALS TODAY-PROCEEDINGS, 2020, 23 : 651 - 658
  • [43] A comparative in vitro study of different composite materials in terms of aligner attachment accuracy and surface roughness using different curing irradiances
    Erbas, Servet
    Atik, Ezgi
    INTERNATIONAL ORTHODONTICS, 2025, 23 (02)
  • [44] On the development of expert system for selecting the optimum cutting conditions (2nd report). Subsystems for evaluating dimensional accuracy and surface roughness
    Matsumura, Takashi
    Obikawa, Toshiyuki
    Shirakashi, Takahiro
    Usui, Eiji
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1991, 57 (06): : 1053 - 1059
  • [45] Accuracy evaluation of the optical surface monitoring system on EDGE linear accelerator in a phantom study
    Mancosu, Pietro
    Fogliata, Antonella
    Stravato, Antonella
    Tomatis, Stefano
    Cozzi, Luca
    Scorsetti, Marta
    MEDICAL DOSIMETRY, 2016, 41 (02) : 173 - 179
  • [46] EXPERIMENTAL STUDY OF THE EFFECT OF ENGINEERING SYSTEM CONDITION DURING TURNING POLYMER MATERIALS ON MACHINED SURFACE ROUGHNESS
    Erenkov, O. Yu.
    Erenkov, S. O.
    Radchenko, M. V.
    CHEMICAL AND PETROLEUM ENGINEERING, 2013, 49 (7-8) : 491 - 494
  • [47] A study of the improvement surface roughness and optimum machining characteristic of L-shaped tube STS 316L by electropolishing
    Seong-Hyun Kim
    Seung-Gun Choi
    Woong-Kirl Choi
    Eun-Sang Lee
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 2313 - 2324
  • [48] Improvement of surface accuracy and shop floor feed rate smoothing through open CNC monitoring system and cutting simulation
    Schuetzer, K.
    Uhlmann, E.
    Del Conte, E.
    Mewis, J.
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 90 - 95
  • [49] A study of the improvement surface roughness and optimum machining characteristic of L-shaped tube STS 316L by electropolishing
    Kim, Seong-Hyun
    Choi, Seung-Gun
    Choi, Woong-Kirl
    Lee, Eun-Sang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (9-12): : 2313 - 2324
  • [50] Estimation of optimum lapping conditions for automated lapping system (estimation of improvement speed of surface roughness for optimum lapping and high lapping efficiency)
    Iyama T.
    Tanabe I.
    Binh H.T.
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2010, 76 (767): : 1827 - 1832
12345