Closure to Discussion of ‘The Onset of Bubble-Ring Cavitation on Hemispherical Headforms’ (1982, ASME J. Fluids Eng., 104, p. 123)

被引：0

作者：

Parkin, B.R. ^{[1
]}

机构：

[1] The Pennsylvania State University, Garfield Thomas Water Tunnel, Applied Research Laboratory, State College,PA,16801, United States

来源：

Journal of Fluids Engineering, Transactions of the ASME | 1982年 / 104卷 / 01期

关键词：

Compendex;

D O I：

10.1115/1.3240827

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[41] Closure to Discussion of 'The Mean Flow Structure on the Symmetry Plane of a Turbulent Junction Vortex' (1990, ASME J. Fluids Eng., 112, p. 527)
1600, American Society of Mechanical Engineers (ASME) (112):
[42] Closure to Discussions of ‘Gas Compression with the Liquid Jet Pump’ (1975, ASME J. Fluids Eng., 97, p. 133)
Cunningham, R.G.
Journal of Fluids Engineering, Transactions of the ASME, 1975, 97 (01):
[43] Closure to Discussion of 'Prediction of Propeller Cavitation Noise From Model Tests and Its Comparison With Full Scale Data' (1985, ASME J. Fluids Eng., 107, p. 119)
Bark, G.
1600, American Society of Mechanical Engineers (ASME) (107):
[44] Closure to Discussion of ‘A Theoretical Model for the Transverse Impingement of Free Jets at Low Reynolds Number’ (1981, ASME J. Fluids Eng., 103, p. 374)
Winton, R.
Martin, H.R.
Journal of Fluids Engineering, Transactions of the ASME, 1981, 103 (02):
[45] Closure to Discussion of 'An Increase in Base Pressure by Polymer Solutions Added to Separated Shear Layers' (1980, ASME J. Fluids Eng., 102, p. 382)
Kiya, M.
Arie, M.
Shoda, S.
Journal of Fluids Engineering, Transactions of the ASME, 1980, 102 (03):
[46] Closure to Discussion of 'Leading-Edge Correction for the Supercavitating Flat-Plate Hydrofoil' (1978, ASME J. Fluids Eng., 100, p. 280)
Plotkin, Allen
Journal of Fluids Engineering, Transactions of the ASME, 1978, 100 (03):
[47] Closure to Discussion of ‘Two-Way Coupling Effects in Dilute Gas-Particle Flows’ (1982, ASME J. Fluids Eng., 104, pp. 311–312)
Di Giacinto, M.
Sabetta, F.
Piva, R.
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (03):
[48] Closure to Discussions of ‘Discharge Coefficient for Venturi Flowmeter with Short Laying Length’ (1982, ASME J. Fluids Eng., 104, pp. 467–468)
Inoue, Masahiro
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (04):
[49] Closure to Discussion of ‘The Grüneisen Parameter in Fluids’ (1984, ASME J. Fluids Eng., 106, pp. 200–201)
Arp, V.
Persichetti, J.M.
Chen, Guo-Bang
Journal of Fluids Engineering, Transactions of the ASME, 1984, 106 (02):
[50] Discussion: Contributions to the Theory of Single-Sample Uncertainty Analysis (Moffat, R. J., 1982, ASME J. Fluids Eng., 104, pp. 250–258)
Abernethy, R.B.
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (02): : 258 - 259

← 1 2 3 4 5 →